[Sat Jun 22 09:22:56 2013] Detection parameters:
  Position = (277.6, 281.1) = 17 4 7.27 78 37 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.1 +/- 33.4
  Background counts = 525.8
  Rate = 0.03 +/- 0.005

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 1.97'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.926
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 7.41"
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57.csv
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57_1.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57.csv
[Sat Jun 22 09:24:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun 22 09:24:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 5570.930000, observed total counts = 4205.000000
[Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 4780.180000, observed total counts = 4014.000000
[Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:24:42 2013] Source is confused with source 54
[Sat Jun 22 09:24:42 2013] Source is confused with source 55
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.926
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 7.41"
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 09:25:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 09:25:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 4889.070000, observed total counts = 4725.000000
[Sat Jun 22 09:26:22 2013] Offset between fit and detection position for source 58 = 3.648402 pixels
[Sat Jun 22 09:26:22 2013] Warning, changing simple spatial fit ID from 50 to 47
[Sat Jun 22 09:26:22 2013] 4768.100000 total counts/ 4486.680000 bgd. counts: snr = 4.201384
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 3.648402 pixels
  Position = (281.0, 282.4) = 17 4 2.28 78 38 7.6
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 281.4 +/- 69.1
  Background counts = 4486.7
  Rate = 0.03 +/- 0.007
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 4897.720000, observed total counts = 4205.000000
[Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 4772.510000, observed total counts = 4014.000000
[Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:15 2013] XMMSAS src. selection expression = ellipse(24395.879800, 24519.088000, 868.200025, 868.200025, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_src.reg
[Sat Jun 22 09:27:15 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (231, 232) - (331, 332)
[Sat Jun 22 09:27:15 2013] XMMSAS bgd. selection expression = annulus(24395.879800, 24519.088000, 1447.000042, 2894.000083, X, Y) && !ellipse(27239.859253, 27092.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.370819, 26404.077271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.334000, 25892.162000, 595.012817, 595.012817, 0.000000, X, Y) && !ellipse(26774.376862, 25806.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.033600, 28234.228000, 1051.264030, 1051.264030, 0.000000, X, Y) && !ellipse(21934.121719, 23176.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.896210, 28269.776978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26489.909058, 27867.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26035.228000, 27640.416800, 1149.656033, 1149.656033, 0.000000, X, Y) && !ellipse(23968.815369, 27880.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.467590, 27705.498291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.160858, 27350.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.469696, 27452.373108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.030823, 27097.116913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.042023, 27176.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.055862, 23619.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24903.542328, 27097.916077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23038.049713, 26942.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22045.036896, 26592.475494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.335907, 26324.179474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.531616, 26233.871307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25927.417206, 25882.993256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25274.880035, 26069.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22925.898621, 25861.949493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23913.726000, 25439.486000, 999.136029, 999.136029, 0.000000, X, Y) && !ellipse(25998.014435, 25116.340271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21105.809662, 24865.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.002655, 25103.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.142731, 24847.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.002594, 24758.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20760.649216, 24466.078461, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58.gif
[Sat Jun 22 09:27:40 2013] Mean detx,y = (-355.15, -401.93) 
[Sat Jun 22 09:27:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 09:29:02 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 09:29:03 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jun 22 09:29:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jun 22 13:58:05 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:05 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 5056.00
[Sat Jun 22 13:58:05 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_bgd.pi.gz = 11691.00
[Sat Jun 22 13:58:05 2013] Got source and background scale factors 2088939.000000, 6842094.000000
[Sat Jun 22 13:58:05 2013] User source parameters:
  Position = (281.0, 282.4) = 17 4 2.28 78 38 7.6
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source aperture counts = 1486.7 +/- 72.1
  Background aperture counts = 3569.3
  Rate = 0.2 +/- 0.008

[Sat Jun 22 13:58:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:09 2013] Using photon index=1.80, rate=0.0297, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58.arf
[Sat Jun 22 13:58:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:09 2013] Updating source flux to 8.2e-14
[Sat Jun 22 13:58:51 2013] Flag p found in src. 58 procflags, skipping spectral fitting
[Sat Jun 22 13:58:51 2013] Flag c found in src. 58 procflags, skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete