[Sat Jun 22 09:22:56 2013] Detection parameters:
  Position = (340.3, 282.0) = 17 2 34.95 78 38 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.7 +/- 29.6
  Background counts = 280.1
  Rate = 0.03 +/- 0.003

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 3.26'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 8.06"
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56.csv
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56.csv
[Sat Jun 22 09:24:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Jun 22 09:24:07 2013] Fit fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sat Jun 22 09:24:42 2013] Source 57 is offset by 1.201019 and 6.435606 pixels which is larger than
2 X fitted extent = 1.644317 x 1.644317, not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 8.06"
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49.csv
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49.csv
[Sat Jun 22 09:25:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Jun 22 09:25:52 2013] Fit fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Jun 22 09:26:22 2013] Source 57 is offset by 1.200086 and 6.435606 pixels which is larger than
2 X fitted extent = 1.612359 x 1.612359, not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:15 2013] XMMSAS src. selection expression = ellipse(29558.387482, 24487.687744, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src.reg
[Sat Jun 22 09:27:15 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (303, 245) - (378, 320)
[Sat Jun 22 09:27:15 2013] XMMSAS bgd. selection expression = annulus(29558.387482, 24487.687744, 1087.500000, 2175.000000, X, Y) && !ellipse(27239.859253, 27092.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.677917, 26311.676941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.370819, 26404.077271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.334000, 25892.162000, 595.012817, 595.012817, 0.000000, X, Y) && !ellipse(26774.376862, 25806.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.398743, 25700.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28780.336456, 24743.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28637.774658, 27429.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29430.566406, 27272.115204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.395142, 26917.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.948547, 26734.161133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30768.086440, 23699.632800, 978.896028, 978.896028, 0.000000, X, Y) && !ellipse(28961.802399, 27009.694763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29672.630737, 26050.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.481934, 24781.365845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.002655, 25103.012024, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57.gif
[Sat Jun 22 09:27:21 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Sat Jun 22 09:27:21 2013] Mean detx,y = (-4903.99, 1924.45) 
[Sat Jun 22 09:27:21 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Sat Jun 22 09:27:21 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Sat Jun 22 09:27:21 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jun 22 09:27:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jun 22 10:22:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 10:22:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:05 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:05 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 2210.00
[Sat Jun 22 13:58:05 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_bgd.pi.gz = 3899.00
[Sat Jun 22 13:58:05 2013] Got source and background scale factors 1339200.000000, 3799456.000000
[Sat Jun 22 13:58:05 2013] User source parameters:
  Position = (340.3, 282.0) = 17 2 34.95 78 38 4.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 835.7 +/- 48.0
  Background aperture counts = 1374.3
  Rate = 0.09 +/- 0.005

[Sat Jun 22 13:58:05 2013] Updating counts from extracted products
[Sat Jun 22 13:58:05 2013] Set source signif. to 835.71/37.07 = 22.54
[Sat Jun 22 13:58:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:09 2013] Using photon index=1.80, rate=0.0882, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57.arf
[Sat Jun 22 13:58:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:09 2013] Updating source flux to 3.5e-13
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete