[Sat Jun 22 09:22:54 2013] Detection parameters:
  Position = (253.9, 306.2) = 17 4 42.20 78 39 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.5 +/- 28.9
  Background counts = 389.2
  Rate = 0.01 +/- 0.003

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 3.27'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 8.07"
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 09:24:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 22 09:24:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 3201.720000, observed total counts = 2752.000000
[Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:24:42 2013] Source 38 is offset by -2.994335 and 0.749213 pixels which is larger than
2 X fitted extent = 1.626538 x 1.626538, not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 8.07"
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34.csv
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34.csv
[Sat Jun 22 09:25:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Jun 22 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Source 38 is offset by 6.249665 and 0.162307 pixels which is larger than
2 X fitted extent = 0.930533 x 0.930533, not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:14 2013] XMMSAS src. selection expression = ellipse(22045.036896, 26592.475494, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:14 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src.reg
[Sat Jun 22 09:27:14 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (216, 269) - (291, 344)
[Sat Jun 22 09:27:14 2013] XMMSAS bgd. selection expression = annulus(22045.036896, 26592.475494, 1087.500000, 2175.000000, X, Y) && !ellipse(24900.033600, 28234.228000, 1051.264030, 1051.264030, 0.000000, X, Y) && !ellipse(23968.815369, 27880.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.160858, 27350.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.469696, 27452.373108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.055862, 23619.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24903.542328, 27097.916077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23038.049713, 26942.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.335907, 26324.179474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.531616, 26233.871307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20476.339386, 23802.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22925.898621, 25861.949493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23913.726000, 25439.486000, 999.136029, 999.136029, 0.000000, X, Y) && !ellipse(21105.809662, 24865.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.142731, 24847.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.002594, 24758.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.879800, 24519.088000, 1157.600033, 1157.600033, 0.000000, X, Y) && !ellipse(20760.649216, 24466.078461, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:14 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38.gif
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Sat Jun 22 09:27:20 2013] Mean detx,y = (2573.34, 230.29) 
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Sat Jun 22 09:27:20 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jun 22 09:27:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Sat Jun 22 09:55:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 09:55:36 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:57:59 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:57:59 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 2040.00
[Sat Jun 22 13:58:00 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_bgd.pi.gz = 5316.00
[Sat Jun 22 13:58:00 2013] Got source and background scale factors 1180836.000000, 4104515.000000
[Sat Jun 22 13:58:00 2013] User source parameters:
  Position = (253.9, 306.2) = 17 4 42.20 78 39 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 510.6 +/- 46.2
  Background aperture counts = 1529.4
  Rate = 0.05 +/- 0.005

[Sat Jun 22 13:58:00 2013] Updating counts from extracted products
[Sat Jun 22 13:58:00 2013] Set source signif. to 510.63/39.11 = 13.06
[Sat Jun 22 13:58:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:08 2013] Using photon index=1.80, rate=0.0539, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38.arf
[Sat Jun 22 13:58:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:08 2013] Updating source flux to 1.5e-13
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete