[Sat Jun 22 09:22:54 2013] Detection parameters: Position = (345.8, 307.8) = 17 2 26.66 78 39 57.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 120.6 +/- 24.7 Background counts = 277.1 Rate = 0.01 +/- 0.003 [Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 3.50' [Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.18" [Sat Jun 22 09:24:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103 [Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.18" [Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31.ximg exists [Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31.csv [Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31_1.ximg exists [Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31.csv [Sat Jun 22 09:24:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31.csv [Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31.csv [Sat Jun 22 09:24:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 2923.880000, observed total counts = 2381.000000 [Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 32 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 22 09:24:42 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.228405 pixels away [Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:24:42 2013] Assessing source extent using major [Sat Jun 22 09:24:42 2013] Source does appear to be extended [Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.18" [Sat Jun 22 09:25:48 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103 [Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.18" [Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28.ximg exists [Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28.csv [Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28_1.ximg exists [Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28.csv [Sat Jun 22 09:25:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.csv [Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.csv [Sat Jun 22 09:25:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 2918.650000, observed total counts = 2381.000000 [Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 32 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 22 09:26:22 2013] Source 32 is offset by -6.366017 and 0.614758 pixels which is larger than 2 X fitted extent = 2.685950 x 2.685950, not incorporating fit results [Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:26:22 2013] Assessing source extent using major [Sat Jun 22 09:26:22 2013] Source does appear to be extended [Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 09:27:13 2013] XMMSAS src. selection expression = ellipse(30036.948547, 26734.161133, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 22 09:27:13 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src.reg [Sat Jun 22 09:27:13 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (308, 270) - (383, 345) [Sat Jun 22 09:27:14 2013] XMMSAS bgd. selection expression = annulus(30036.948547, 26734.161133, 1087.500000, 2175.000000, X, Y) && !ellipse(27239.859253, 27092.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.677917, 26311.676941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.398743, 25700.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28780.336456, 24743.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.613525, 28183.138062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.896210, 28269.776978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28637.774658, 27429.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29430.566406, 27272.115204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.395142, 26917.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30768.086440, 23699.632800, 978.896028, 978.896028, 0.000000, X, Y) && !ellipse(28961.802399, 27009.694763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29672.630737, 26050.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.481934, 24781.365845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.002655, 25103.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29558.387482, 24487.687744, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 22 09:27:14 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32.gif [Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create [Sat Jun 22 09:27:20 2013] Mean detx,y = (-4375.65, 4111.77) [Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create [Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create [Sat Jun 22 09:27:20 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Sat Jun 22 09:27:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.pi.gz [Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create [Sat Jun 22 09:52:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 22 09:52:19 2013] rmf not generated due to insufficient counts [Sat Jun 22 13:57:58 2013] Updating aperture counts using extracted products [Sat Jun 22 13:57:58 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 1589.00 [Sat Jun 22 13:57:58 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_bgd.pi.gz = 4489.00 [Sat Jun 22 13:57:59 2013] Got source and background scale factors 1143524.000000, 4826103.000000 [Sat Jun 22 13:57:59 2013] User source parameters: Position = (345.8, 307.8) = 17 2 26.66 78 39 57.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 525.4 +/- 40.9 Background aperture counts = 1063.6 Rate = 0.06 +/- 0.004 [Sat Jun 22 13:57:59 2013] Updating counts from extracted products [Sat Jun 22 13:57:59 2013] Set source signif. to 525.35/32.61 = 16.11 [Sat Jun 22 13:58:08 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 22 13:58:08 2013] Using photon index=1.80, rate=0.0555, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32.arf [Sat Jun 22 13:58:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 22 13:58:08 2013] Updating source flux to 2.3e-13 [Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete