[Sat Jun 22 09:22:52 2013] Detection parameters:
  Position = (252.7, 267.0) = 17 4 43.80 78 36 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.0 +/- 30.5
  Background counts = 437.0
  Rate = 0.01 +/- 0.003

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 4.03'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.839
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.44"
[Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12.csv
[Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12.csv
[Sat Jun 22 09:24:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 22 09:24:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Warning, spatial fit 12 centroid is now closest to src. 29
[Sat Jun 22 09:24:42 2013] Source 13 is offset by 0.311836 and 1.285065 pixels which is larger than
2 X fitted extent = 0.987917 x 0.987917, not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.839
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.44"
[Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 09:25:49 2013] Fit fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src11 appears to have run properly
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.261677 pixels away
[Sat Jun 22 09:26:22 2013] Source 13 is offset by 0.329376 and 1.290191 pixels which is larger than
2 X fitted extent = 1.011076 x 1.011076, not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:12 2013] XMMSAS src. selection expression = ellipse(21934.121719, 23176.708618, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:12 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 22 09:27:12 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (215, 229) - (290, 304)
[Sat Jun 22 09:27:12 2013] XMMSAS bgd. selection expression = annulus(21934.121719, 23176.708618, 1087.500000, 2175.000000, X, Y) && !ellipse(21435.055862, 23619.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20476.339386, 23802.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22925.898621, 25861.949493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23913.726000, 25439.486000, 999.136029, 999.136029, 0.000000, X, Y) && !ellipse(21105.809662, 24865.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.142731, 24847.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.002594, 24758.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.879800, 24519.088000, 1157.600033, 1157.600033, 0.000000, X, Y) && !ellipse(20760.649216, 24466.078461, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:12 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13.gif
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Jun 22 09:27:20 2013] Mean detx,y = (1238.21, -2818.89) 
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Jun 22 09:27:20 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 22 09:27:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 22 09:27:20 2013] ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Jun 22 09:44:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 09:44:10 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:57:52 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:57:52 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 2208.00
[Sat Jun 22 13:57:52 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 10907.00
[Sat Jun 22 13:57:52 2013] Got source and background scale factors 1167175.000000, 6519398.000000
[Sat Jun 22 13:57:52 2013] User source parameters:
  Position = (252.7, 267.0) = 17 4 43.80 78 36 55.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 255.3 +/- 48.0
  Background aperture counts = 1952.7
  Rate = 0.03 +/- 0.005

[Sat Jun 22 13:57:52 2013] Updating counts from extracted products
[Sat Jun 22 13:57:52 2013] Set source signif. to 255.31/44.19 = 5.78
[Sat Jun 22 13:58:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:07 2013] Using photon index=1.80, rate=0.027, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13.arf
[Sat Jun 22 13:58:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:07 2013] Updating source flux to 9.2e-14
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete