[Sat Jun 22 09:22:52 2013] Detection parameters:
  Position = (331.4, 285.0) = 17 2 48.09 78 38 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.0 +/- 32.0
  Background counts = 308.7
  Rate = 0.04 +/- 0.004

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 2.58'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.870
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.72"
[Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 09:24:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 09:24:06 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 22 09:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 09:24:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 3776.540000, observed total counts = 3059.000000
[Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.870
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.72"
[Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun 22 09:25:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun 22 09:25:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 09:25:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Source 10 is offset by 0.574741 and -5.199565 pixels which is larger than
2 X fitted extent = 3.419614 x 3.419614, not incorporating fit results
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 3764.130000, observed total counts = 3059.000000
[Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:12 2013] XMMSAS src. selection expression = ellipse(28780.336456, 24743.799835, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:12 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 22 09:27:12 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (294, 247) - (369, 322)
[Sat Jun 22 09:27:12 2013] XMMSAS bgd. selection expression = annulus(28780.336456, 24743.799835, 1087.500000, 2175.000000, X, Y) && !ellipse(27239.859253, 27092.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.677917, 26311.676941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.370819, 26404.077271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.334000, 25892.162000, 595.012817, 595.012817, 0.000000, X, Y) && !ellipse(26774.376862, 25806.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.398743, 25700.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26035.228000, 27640.416800, 1149.656033, 1149.656033, 0.000000, X, Y) && !ellipse(28637.774658, 27429.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29430.566406, 27272.115204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.030823, 27097.116913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.042023, 27176.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.395142, 26917.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.948547, 26734.161133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30768.086440, 23699.632800, 978.896028, 978.896028, 0.000000, X, Y) && !ellipse(28961.802399, 27009.694763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29672.630737, 26050.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25927.417206, 25882.993256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25998.014435, 25116.340271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.481934, 24781.365845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.002655, 25103.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29558.387482, 24487.687744, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:12 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10.gif
[Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Jun 22 09:27:19 2013] Mean detx,y = (-4200.14, 1806.05) 
[Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Jun 22 09:27:19 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 22 09:27:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Jun 22 09:40:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 09:40:26 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:57:51 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:57:51 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 2107.00
[Sat Jun 22 13:57:51 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 3690.00
[Sat Jun 22 13:57:51 2013] Got source and background scale factors 1076537.000000, 3170103.000000
[Sat Jun 22 13:57:51 2013] User source parameters:
  Position = (331.4, 285.0) = 17 2 48.09 78 38 20.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 853.9 +/- 46.9
  Background aperture counts = 1253.1
  Rate = 0.09 +/- 0.005

[Sat Jun 22 13:57:51 2013] Updating counts from extracted products
[Sat Jun 22 13:57:51 2013] Set source signif. to 853.91/35.40 = 24.12
[Sat Jun 22 13:58:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:07 2013] Using photon index=1.80, rate=0.0902, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10.arf
[Sat Jun 22 13:58:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:07 2013] Updating source flux to 3.7e-13
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete