[Sat Jun 22 09:22:51 2013] Detection parameters: Position = (129.7, 305.0) = 17 7 45.42 78 39 41.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 569.4 +/- 33.2 Background counts = 114.6 Rate = 0.04 +/- 0.003 [Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 12.24' [Sat Jun 22 09:24:03 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting [Sat Jun 22 09:24:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 12.55" [Sat Jun 22 09:24:03 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.916 [Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.55" [Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1.ximg exists [Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1.csv [Sat Jun 22 09:24:04 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Jun 22 09:24:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1.csv [Sat Jun 22 09:24:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Jun 22 09:24:05 2013] Fit fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 2035.000000, observed total counts = 2035.000000 [Sat Jun 22 09:24:42 2013] Offset between fit and detection position for source 1 = 0.078259 pixels [Sat Jun 22 09:24:42 2013] 2034.870000 total counts/ 1740.370000 bgd. counts: snr = 7.059347 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.078259 pixels Position = (129.7, 304.9) = 17 7 45.40 78 39 39.3 Extent = 6.5 (5.7-7.4)", rotation angle = 0 Source counts = 294.5 +/- 45.1 Background counts = 1740.4 Rate = 0.03 +/- 0.005 [Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:24:42 2013] Assessing source extent using major axis lower bound [Sat Jun 22 09:24:42 2013] Source does appear to be extended [Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 09:25:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 6.49" [Sat Jun 22 09:25:48 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009 [Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.49" [Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1.ximg exists [Sat Jun 22 09:25:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1.csv [Sat Jun 22 09:25:49 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Jun 22 09:25:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1.csv [Sat Jun 22 09:25:49 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Jun 22 09:25:51 2013] Fit fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 1150.000000, observed total counts = 1150.000000 [Sat Jun 22 09:26:22 2013] Offset between fit and detection position for source 1 = 0.015646 pixels [Sat Jun 22 09:26:22 2013] 1147.860000 total counts/ 857.996000 bgd. counts: snr = 9.895817 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.015646 pixels Position = (129.7, 305.0) = 17 7 45.39 78 39 39.4 Extent = 6.4 (5.6-7.4)", rotation angle = 0 Source counts = 289.9 +/- 33.9 Background counts = 858.0 Rate = 0.03 +/- 0.004 [Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:26:22 2013] Assessing source extent using major axis lower bound [Sat Jun 22 09:26:22 2013] Source does appear to be extended [Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 09:27:11 2013] XMMSAS src. selection expression = ellipse(11239.605800, 26483.126200, 384.258611, 384.258611, 0.000000, X, Y) [Sat Jun 22 09:27:11 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src.reg [Sat Jun 22 09:27:11 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (108, 283) - (152, 327) [Sat Jun 22 09:27:11 2013] XMMSAS bgd. selection expression = annulus(11239.605800, 26483.126200, 640.431018, 1280.862037, X, Y) [Sat Jun 22 09:27:11 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1.gif [Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112500201/products/events/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create [Sat Jun 22 09:27:19 2013] Mean detx,y = (12143.49, -4966.84) [Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112500201/products/images/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create [Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112500201/products/spectra/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create [Sat Jun 22 09:27:19 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jun 22 09:27:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Jun 22 09:27:19 2013] ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112500201/products/lightcurves/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create [Sat Jun 22 13:57:48 2013] Updating aperture counts using extracted products [Sat Jun 22 13:57:48 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 503.00 [Sat Jun 22 13:57:48 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1634.00 [Sat Jun 22 13:57:48 2013] Got source and background scale factors 464000.000000, 3870400.000000 [Sat Jun 22 13:57:48 2013] User source parameters: Position = (129.7, 305.0) = 17 7 45.39 78 39 39.4 Extent = 6.4 (5.6-7.4)", rotation angle = 0 Source aperture counts = 307.1 +/- 23.4 Background aperture counts = 195.9 Rate = 0.03 +/- 0.002 [Sat Jun 22 13:58:06 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 22 13:58:06 2013] Using photon index=1.80, rate=0.0306, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1.arf [Sat Jun 22 13:58:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 22 13:58:06 2013] Updating source flux to 2.1e-13 [Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete