[Sat Jun 22 09:23:10 2013] Detection parameters: Position = (279.1, 350.8) = 17 4 5.16 78 43 4.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 123.5 +/- 18.3 Background counts = 90.2 Rate = 0.008 +/- 0.001 [Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 4.05' [Sat Jun 22 09:24:12 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting [Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 8.45" [Sat Jun 22 09:24:12 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.047 [Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.45" [Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29.ximg exists [Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29.csv [Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29_1.ximg exists [Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29.csv [Sat Jun 22 09:24:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sat Jun 22 09:24:16 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Sat Jun 22 09:25:24 2013] Spatial fit model total counts = 970.905000, observed total counts = 971.000000 [Sat Jun 22 09:25:24 2013] Offset between fit and detection position for source 56 = 0.078599 pixels [Sat Jun 22 09:25:24 2013] 960.629800 total counts/ 876.874000 bgd. counts: snr = 2.828436 Spatial fit parameters: Offset between fit and detection position for source 56 = 0.078599 pixels Position = (279.2, 350.7) = 17 4 5.09 78 43 5.0 Extent = 4.7 (3.5-6.8)", rotation angle = 0 Source counts = 83.8 +/- 31.0 Background counts = 876.9 Rate = 0.005 +/- 0.002 [Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:25:24 2013] Assessing source extent using major axis lower bound [Sat Jun 22 09:25:24 2013] Source does appear to be extended [Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 09:25:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 4.72" [Sat Jun 22 09:25:55 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.896 [Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 4.72" [Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src19.ximg exists [Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src19_1.ximg exists [Sat Jun 22 09:25:57 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src19 appears to have run properly [Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sat Jun 22 09:25:58 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Sat Jun 22 09:26:50 2013] Spatial fit model total counts = 950.992000, observed total counts = 951.000000 [Sat Jun 22 09:26:50 2013] Offset between fit and detection position for source 56 = 0.018107 pixels [Sat Jun 22 09:26:50 2013] 943.791700 total counts/ 861.078000 bgd. counts: snr = 2.818748 Spatial fit parameters: Offset between fit and detection position for source 56 = 0.018107 pixels Position = (279.2, 350.7) = 17 4 5.11 78 43 4.9 Extent = 4.7 (3.4-6.6)", rotation angle = 0 Source counts = 82.7 +/- 30.7 Background counts = 861.1 Rate = 0.005 +/- 0.002 [Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000 [Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 22 09:26:50 2013] Assessing source extent using major axis lower bound [Sat Jun 22 09:26:50 2013] Source does appear to be extended [Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 22 12:27:17 2013] XMMSAS src. selection expression = ellipse(24240.686680, 30465.329600, 281.208811, 281.208811, 0.000000, X, Y) [Sat Jun 22 12:27:17 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_src.reg [Sat Jun 22 12:27:17 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (263, 335) - (295, 367) [Sat Jun 22 12:27:17 2013] XMMSAS bgd. selection expression = annulus(24240.686680, 30465.329600, 468.681352, 937.362703, X, Y) [Sat Jun 22 12:27:17 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56.gif [Sat Jun 22 12:34:19 2013] Mean detx,y = (-2466.58, -4804.41) [Sat Jun 22 12:34:21 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 22 12:34:30 2013] Binned source spectrum to 10 counts/bin [Sat Jun 22 12:34:31 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_src_b10.pi.gz [Sat Jun 22 12:34:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_bgd.pi.gz [Sat Jun 22 13:48:14 2013] Not generating rmf since there are only 82 counts [Sat Jun 22 13:48:14 2013] rmf not generated due to insufficient counts [Sat Jun 22 13:58:20 2013] Updating aperture counts using extracted products [Sat Jun 22 13:58:20 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 201.00 [Sat Jun 22 13:58:20 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 950.00 [Sat Jun 22 13:58:20 2013] Got source and background scale factors 251200.000000, 2068760.000000 [Sat Jun 22 13:58:20 2013] User source parameters: Position = (279.2, 350.7) = 17 4 5.11 78 43 4.9 Extent = 4.7 (3.4-6.6)", rotation angle = 0 Source aperture counts = 85.6 +/- 15.2 Background aperture counts = 115.4 Rate = 0.005 +/- 0.0009 [Sat Jun 22 13:58:24 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 22 13:58:24 2013] Using photon index=1.80, rate=0.00494, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56.arf [Sat Jun 22 13:58:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 22 13:58:24 2013] Updating source flux to 7.9e-14 [Sat Jun 22 13:58:39 2013] Source 56 has fewer than 100.000000 counts, skipping spectral fitting [Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete