[Sat Jun 22 09:23:10 2013] Detection parameters:
  Position = (283.8, 282.8) = 17 3 58.04 78 38 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.6 +/- 23.7
  Background counts = 227.9
  Rate = 0.007 +/- 0.001

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 1.55'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.20"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 09:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun 22 09:24:16 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Jun 22 09:25:24 2013] Source 54 is offset by -5.780772 and -5.831158 pixels which is larger than
2 X fitted extent = 0.948215 x 0.948215, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Sat Jun 22 09:25:55 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.20"
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 09:25:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 22 09:25:58 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 22 09:26:50 2013] Spatial fit model total counts = 2745.010000, observed total counts = 2745.000000
[Sat Jun 22 09:26:50 2013] Offset between fit and detection position for source 54 = 0.539050 pixels
[Sat Jun 22 09:26:50 2013] 2731.141200 total counts/ 2701.060000 bgd. counts: snr = 0.578799
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.539050 pixels
  Position = (284.0, 283.3) = 17 3 57.80 78 38 11.6
  Extent = 2.7 (1.8-4.7)", rotation angle = 0
  Source counts = 30.1 +/- 52.3
  Background counts = 2701.1
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability