[Sat Jun 22 09:23:08 2013] Detection parameters:
  Position = (280.1, 315.1) = 17 4 3.70 78 40 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.5 +/- 20.3
  Background counts = 173.6
  Rate = 0.007 +/- 0.001

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 1.80'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 7.33"
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src42.ximg exists
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Jun 22 09:24:15 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src42 appears to have run properly
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Jun 22 09:24:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:24 2013] Source 40 is offset by -7.596126 and -0.378823 pixels which is larger than
2 X fitted extent = 6.587035 x 6.587035, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Source 40 is offset by -5.350225 and 5.834009 pixels which is larger than
2 X fitted extent = 0.842262 x 0.842262, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Jun 22 09:25:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.33"
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28.csv
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28.csv
[Sat Jun 22 09:25:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun 22 09:25:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun 22 09:25:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 22 09:25:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:50 2013] Source 40 is offset by -4.388179 and -4.720405 pixels which is larger than
2 X fitted extent = 0.849508 x 0.849508, not incorporating fit results
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:17 2013] XMMSAS src. selection expression = ellipse(24316.876434, 27364.844757, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:27:17 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_src.reg
[Sat Jun 22 12:27:17 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (243, 278) - (318, 353)
[Sat Jun 22 12:27:17 2013] XMMSAS bgd. selection expression = annulus(24316.876434, 27364.844757, 1087.500000, 2175.000000, X, Y) && !ellipse(23303.608398, 25049.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.863953, 27058.202148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.532000, 26049.080000, 1100.392032, 1100.392032, 0.000000, X, Y) && !ellipse(27008.870000, 26201.142000, 1124.872032, 1124.872032, 0.000000, X, Y) && !ellipse(25408.552795, 26554.338654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.575000, 25231.768000, 1106.696032, 1106.696032, 0.000000, X, Y) && !ellipse(26216.480865, 25871.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.378204, 26474.252350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.085800, 25137.926800, 1083.376031, 1083.376031, 0.000000, X, Y) && !ellipse(27346.748077, 27696.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.951447, 27010.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21349.047516, 25016.550995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.623779, 28110.937195, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:27:17 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40.gif
[Sat Jun 22 12:37:59 2013] Mean detx,y = (-923.23, -2113.16) 
[Sat Jun 22 12:38:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:38:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:38:19 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jun 22 12:38:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jun 22 13:56:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 13:56:26 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:21 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:21 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1486.00
[Sat Jun 22 13:58:22 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_bgd.pi.gz = 6877.00
[Sat Jun 22 13:58:22 2013] Got source and background scale factors 1181268.000000, 7528760.000000
[Sat Jun 22 13:58:22 2013] User source parameters:
  Position = (280.1, 315.1) = 17 4 3.70 78 40 28.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 407.0 +/- 39.6
  Background aperture counts = 1079.0
  Rate = 0.02 +/- 0.002

[Sat Jun 22 13:58:22 2013] Updating counts from extracted products
[Sat Jun 22 13:58:22 2013] Set source signif. to 406.99/32.85 = 12.39
[Sat Jun 22 13:58:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:24 2013] Using photon index=1.80, rate=0.0243, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40.arf
[Sat Jun 22 13:58:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:24 2013] Updating source flux to 2.5e-13
[Sat Jun 22 13:58:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete