[Sat Jun 22 09:23:07 2013] Detection parameters:
  Position = (88.6, 331.3) = 17 8 46.90 78 41 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.0 +/- 11.7
  Background counts = 21.1
  Rate = 0.004 +/- 0.0007

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 15.40'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Sat Jun 22 09:24:12 2013] source mask rpix=3.2, npix_max = 56, mask sum = 37, frac = 0.659
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 14.13"
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 09:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:17 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Jun 22 09:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 09:24:17 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Jun 22 09:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 09:24:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:24 2013] Source 30 is offset by -0.740039 and -2.091534 pixels which is larger than
2 X fitted extent = 1.708294 x 1.708294, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:24 2013] Deleting source due to low Poisson probability 0.9