[Sat Jun 22 09:23:07 2013] Detection parameters:
  Position = (337.8, 281.0) = 17 2 38.60 78 38 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.9 +/- 21.4
  Background counts = 101.4
  Rate = 0.01 +/- 0.002

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 3.12'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.99"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21.csv
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21.csv
[Sat Jun 22 09:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Jun 22 09:24:16 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Jun 22 09:25:24 2013] Source 29 is offset by -0.696648 and 5.599704 pixels which is larger than
2 X fitted extent = 1.386326 x 1.386326, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Source 29 is offset by -0.729522 and 5.673980 pixels which is larger than
2 X fitted extent = 1.373835 x 1.373835, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:24 2013] Source is confused with source 28
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Sat Jun 22 09:25:55 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.99"
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 22 09:25:56 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src16 appears to have run properly
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 22 09:25:58 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Jun 22 09:26:50 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.752973 pixels away
[Sat Jun 22 09:26:50 2013] Warning, spatial fit 16 centroid is now closest to src. 28
[Sat Jun 22 09:26:50 2013] Source 29 is offset by -0.714878 and 5.588922 pixels which is larger than
2 X fitted extent = 1.250083 x 1.250083, not incorporating fit results
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:16 2013] XMMSAS src. selection expression = ellipse(29342.533600, 24397.074249, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun 22 12:27:16 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (300, 243) - (375, 318)
[Sat Jun 22 12:27:16 2013] XMMSAS bgd. selection expression = annulus(29342.533600, 24397.074249, 1087.500000, 2175.000000, X, Y) && !ellipse(28214.586000, 24898.348000, 1241.872036, 1241.872036, 0.000000, X, Y) && !ellipse(27143.532000, 26049.080000, 1100.392032, 1100.392032, 0.000000, X, Y) && !ellipse(28604.866000, 24656.264000, 1196.376034, 1196.376034, 0.000000, X, Y) && !ellipse(27008.870000, 26201.142000, 1124.872032, 1124.872032, 0.000000, X, Y) && !ellipse(28086.941040, 26740.918182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.575000, 25231.768000, 1106.696032, 1106.696032, 0.000000, X, Y) && !ellipse(29651.857788, 24915.882904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29001.248000, 26982.918000, 1218.816035, 1218.816035, 0.000000, X, Y) && !ellipse(26419.378204, 26474.252350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27911.914000, 27597.298000, 1249.328036, 1249.328036, 0.000000, X, Y) && !ellipse(26120.085800, 25137.926800, 1083.376031, 1083.376031, 0.000000, X, Y) && !ellipse(30023.464000, 26304.724000, 1283.648037, 1283.648037, 0.000000, X, Y) && !ellipse(26531.951447, 27010.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29923.363739, 24233.872253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.987488, 25791.540771, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29.gif
[Sat Jun 22 12:32:49 2013] Mean detx,y = (4896.94, -1944.36) 
[Sat Jun 22 12:32:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:33:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:33:10 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 22 12:33:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun 22 13:37:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 13:37:27 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:19 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:19 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1311.00
[Sat Jun 22 13:58:19 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2255.00
[Sat Jun 22 13:58:19 2013] Got source and background scale factors 1338380.000000, 4640441.000000
[Sat Jun 22 13:58:19 2013] User source parameters:
  Position = (337.8, 281.0) = 17 2 38.60 78 38 0.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 660.6 +/- 37.2
  Background aperture counts = 650.4
  Rate = 0.04 +/- 0.002

[Sat Jun 22 13:58:19 2013] Updating counts from extracted products
[Sat Jun 22 13:58:19 2013] Set source signif. to 660.62/25.50 = 25.90
[Sat Jun 22 13:58:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:24 2013] Using photon index=1.80, rate=0.0394, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29.arf
[Sat Jun 22 13:58:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:24 2013] Updating source flux to 5.4e-13
[Sat Jun 22 13:58:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete