[Sat Jun 22 09:23:07 2013] Detection parameters:
  Position = (301.9, 297.9) = 17 3 31.46 78 39 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.7 +/- 25.8
  Background counts = 189.6
  Rate = 0.01 +/- 0.002

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 0.25'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 6.56"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 6.56"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20.csv
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20.csv
[Sat Jun 22 09:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 22 09:24:16 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Jun 22 09:25:24 2013] Source 24 is offset by 3.300194 and 2.051167 pixels which is larger than
2 X fitted extent = 1.872929 x 1.872929, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:24 2013] Source is confused with source 20
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 6.56"
[Sat Jun 22 09:25:55 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 6.56"
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 22 09:25:56 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 22 09:25:58 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jun 22 09:26:50 2013] Source 24 is offset by 3.474769 and 2.024155 pixels which is larger than
2 X fitted extent = 1.757310 x 1.757310, not incorporating fit results
[Sat Jun 22 09:26:50 2013] Source 24 is offset by 2.234861 and -2.459431 pixels which is larger than
2 X fitted extent = 0.774952 x 0.774952, not incorporating fit results
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:16 2013] XMMSAS src. selection expression = ellipse(26216.480865, 25871.531494, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 22 12:27:16 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (264, 260) - (339, 335)
[Sat Jun 22 12:27:16 2013] XMMSAS bgd. selection expression = annulus(26216.480865, 25871.531494, 1087.500000, 2175.000000, X, Y) && !ellipse(23303.608398, 25049.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.863953, 27058.202148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.586000, 24898.348000, 1241.872036, 1241.872036, 0.000000, X, Y) && !ellipse(27143.532000, 26049.080000, 1100.392032, 1100.392032, 0.000000, X, Y) && !ellipse(28604.866000, 24656.264000, 1196.376034, 1196.376034, 0.000000, X, Y) && !ellipse(27008.870000, 26201.142000, 1124.872032, 1124.872032, 0.000000, X, Y) && !ellipse(25408.552795, 26554.338654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.941040, 26740.918182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.575000, 25231.768000, 1106.696032, 1106.696032, 0.000000, X, Y) && !ellipse(29001.248000, 26982.918000, 1218.816035, 1218.816035, 0.000000, X, Y) && !ellipse(26419.378204, 26474.252350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27911.914000, 27597.298000, 1249.328036, 1249.328036, 0.000000, X, Y) && !ellipse(26120.085800, 25137.926800, 1083.376031, 1083.376031, 0.000000, X, Y) && !ellipse(27346.748077, 27696.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.951447, 27010.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24316.876434, 27364.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.623779, 28110.937195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28892.160980, 28383.890137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27570.994507, 28124.207031, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24.gif
[Sat Jun 22 12:32:20 2013] Mean detx,y = (1471.10, -1732.98) 
[Sat Jun 22 12:32:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:32:40 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:32:40 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 22 12:32:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun 22 13:37:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 13:37:21 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:19 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:19 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 2001.00
[Sat Jun 22 13:58:19 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 3307.00
[Sat Jun 22 13:58:19 2013] Got source and background scale factors 1337600.000000, 2562104.000000
[Sat Jun 22 13:58:19 2013] User source parameters:
  Position = (301.9, 297.9) = 17 3 31.46 78 39 15.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 274.5 +/- 45.7
  Background aperture counts = 1726.5
  Rate = 0.02 +/- 0.003

[Sat Jun 22 13:58:19 2013] Updating counts from extracted products
[Sat Jun 22 13:58:19 2013] Set source signif. to 274.51/41.55 = 6.61
[Sat Jun 22 13:58:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:24 2013] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24.arf
[Sat Jun 22 13:58:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:24 2013] Updating source flux to 1.9e-13
[Sat Jun 22 13:58:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete