[Sat Jun 22 09:23:06 2013] Detection parameters:
  Position = (285.7, 302.3) = 17 3 55.39 78 39 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 24.8
  Background counts = 202.9
  Rate = 0.008 +/- 0.002

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 0.97'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 6.91"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 6.91"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28.csv
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28.csv
[Sat Jun 22 09:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 22 09:24:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:24 2013] Spatial fit model total counts = 2640.430000, observed total counts = 2583.000000
[Sat Jun 22 09:25:24 2013] Offset between fit and detection position for source 23 = 0.285234 pixels
[Sat Jun 22 09:25:24 2013] Warning, changing simple spatial fit ID from 28 to 12
[Sat Jun 22 09:25:24 2013] 2569.499800 total counts/ 2502.650000 bgd. counts: snr = 1.336288
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.285234 pixels
  Position = (285.8, 302.6) = 17 3 55.24 78 39 35.6
  Extent = 6.0 (3.4-11.1)", rotation angle = 0
  Source counts = 66.8 +/- 50.7
  Background counts = 2502.7
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability