[Sat Jun 22 09:23:04 2013] Detection parameters:
  Position = (129.7, 305.8) = 17 7 45.52 78 39 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.8 +/- 21.0
  Background counts = 29.0
  Rate = 0.02 +/- 0.001

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 12.25'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Sat Jun 22 09:24:12 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.55"
[Sat Jun 22 09:24:13 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 22 09:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 22 09:24:13 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 22 09:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 22 09:24:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 22 09:24:15 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 22 09:25:24 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.042613 pixels away
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Sat Jun 22 09:25:55 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.55"
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 22 09:25:56 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 22 09:25:57 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 22 09:26:50 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.725107 pixels away
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:16 2013] XMMSAS src. selection expression = ellipse(11232.874802, 26554.134216, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 22 12:27:16 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (92, 268) - (167, 343)
[Sat Jun 22 12:27:16 2013] XMMSAS bgd. selection expression = annulus(11232.874802, 26554.134216, 1087.500000, 2175.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2.gif
[Sat Jun 22 12:27:39 2013] Mean detx,y = (-11981.15, 4859.25) 
[Sat Jun 22 12:27:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:28:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:28:02 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 22 12:28:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 22 12:42:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 12:42:08 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:15 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:15 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 405.00
[Sat Jun 22 13:58:16 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1657.00
[Sat Jun 22 13:58:16 2013] Got source and background scale factors 1340800.000000, 10886987.000000
[Sat Jun 22 13:58:16 2013] User source parameters:
  Position = (129.7, 305.8) = 17 7 45.52 78 39 43.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 200.9 +/- 21.1
  Background aperture counts = 204.1
  Rate = 0.01 +/- 0.001

[Sat Jun 22 13:58:16 2013] Updating counts from extracted products
[Sat Jun 22 13:58:16 2013] Set source signif. to 200.93/14.29 = 14.07
[Sat Jun 22 13:58:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:23 2013] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 22 13:58:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:23 2013] Updating source flux to 2.6e-13
[Sat Jun 22 13:58:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete