[Sat Jun 22 09:23:05 2013] Detection parameters:
  Position = (286.5, 314.8) = 17 3 54.18 78 40 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.3 +/- 19.3
  Background counts = 175.1
  Rate = 0.009 +/- 0.001

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 1.47'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.6, npix_max = 18, mask sum = 10, frac = 0.542
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.16"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24.csv
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24.csv
[Sat Jun 22 09:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun 22 09:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 22 09:24:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:24 2013] Spatial fit model total counts = 2430.220000, observed total counts = 2351.000000
[Sat Jun 22 09:25:24 2013] Offset between fit and detection position for source 13 = 2.128548 pixels
[Sat Jun 22 09:25:24 2013] Warning, changing simple spatial fit ID from 24 to 5
[Sat Jun 22 09:25:24 2013] 2370.303700 total counts/ 2299.410000 bgd. counts: snr = 1.478425
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.128548 pixels
  Position = (288.6, 314.9) = 17 3 51.04 78 40 29.0
  Extent = 9.7 (2.8-13.8)", rotation angle = 0
  Source counts = 70.9 +/- 48.7
  Background counts = 2299.4
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability