[Sat Jun 22 09:23:05 2013] Detection parameters:
  Position = (326.6, 314.8) = 17 2 54.94 78 40 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.6 +/- 22.0
  Background counts = 124.6
  Rate = 0.008 +/- 0.001

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 2.36'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.988
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.61"
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27.csv
[Sat Jun 22 09:24:14 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 22 09:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27.csv
[Sat Jun 22 09:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 22 09:24:16 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 22 09:24:16 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun 22 09:25:24 2013] Spatial fit model total counts = 2246.230000, observed total counts = 2245.000000
[Sat Jun 22 09:25:24 2013] Offset between fit and detection position for source 11 = 6.396366 pixels
[Sat Jun 22 09:25:24 2013] Warning, changing simple spatial fit ID from 27 to 25
[Sat Jun 22 09:25:24 2013] 2141.839000 total counts/ 2001.470000 bgd. counts: snr = 3.137593
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 6.396366 pixels
  Position = (322.3, 319.5) = 17 3 1.38 78 40 49.0
  Extent = 14.9 (14.9-29.9)", rotation angle = 0
  Source counts = 140.4 +/- 46.3
  Background counts = 2001.5
  Rate = 0.008 +/- 0.003
[Sat Jun 22 09:25:24 2013] Spatial fit model total counts = 1792.830000, observed total counts = 1791.000000
[Sat Jun 22 09:25:24 2013] Offset between fit and detection position for source 11 = 1.929969 pixels
[Sat Jun 22 09:25:24 2013] Warning, changing simple spatial fit ID from 25 to 35
[Sat Jun 22 09:25:24 2013] 1773.901000 total counts/ 1608.410000 bgd. counts: snr = 4.126444
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.929969 pixels
  Position = (321.4, 317.8) = 17 3 2.67 78 40 41.5
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 165.5 +/- 42.1
  Background counts = 1608.4
  Rate = 0.01 +/- 0.003
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:24 2013] Source is confused with source 19
[Sat Jun 22 09:25:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 15.62"
[Sat Jun 22 09:25:55 2013] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.956
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 15.62"
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 22 09:25:57 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src18 appears to have run properly
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 22 09:25:58 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 22 09:25:58 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 22 09:26:50 2013] Warning, spatial fit 18 centroid is now closest to src. 31
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:16 2013] XMMSAS src. selection expression = ellipse(27911.914000, 27597.298000, 936.996027, 936.996027, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 22 12:27:16 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (268, 264) - (375, 372)
[Sat Jun 22 12:27:17 2013] XMMSAS bgd. selection expression = annulus(27911.914000, 27597.298000, 1561.660045, 3123.320090, X, Y) && !ellipse(25605.863953, 27058.202148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.586000, 24898.348000, 1241.872036, 1241.872036, 0.000000, X, Y) && !ellipse(27143.532000, 26049.080000, 1100.392032, 1100.392032, 0.000000, X, Y) && !ellipse(28604.866000, 24656.264000, 1196.376034, 1196.376034, 0.000000, X, Y) && !ellipse(27008.870000, 26201.142000, 1124.872032, 1124.872032, 0.000000, X, Y) && !ellipse(25408.552795, 26554.338654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.941040, 26740.918182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.575000, 25231.768000, 1106.696032, 1106.696032, 0.000000, X, Y) && !ellipse(29651.857788, 24915.882904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29001.248000, 26982.918000, 1218.816035, 1218.816035, 0.000000, X, Y) && !ellipse(26216.480865, 25871.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29342.533600, 24397.074249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.378204, 26474.252350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.085800, 25137.926800, 1083.376031, 1083.376031, 0.000000, X, Y) && !ellipse(30023.464000, 26304.724000, 1283.648037, 1283.648037, 0.000000, X, Y) && !ellipse(27346.748077, 27696.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.951447, 27010.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29923.363739, 24233.872253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24316.876434, 27364.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.987488, 25791.540771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.623779, 28110.937195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28892.160980, 28383.890137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27570.994507, 28124.207031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.194000, 27680.632000, 952.264027, 952.264027, 0.000000, X, Y)
[Sat Jun 22 12:27:17 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11.gif
[Sat Jun 22 12:33:41 2013] Mean detx,y = (2130.04, -3988.97) 
[Sat Jun 22 12:33:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:34:13 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:34:13 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 22 12:34:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 22 13:58:20 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:20 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 3070.00
[Sat Jun 22 13:58:20 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 4343.00
[Sat Jun 22 13:58:20 2013] Got source and background scale factors 2763980.000000, 7299950.000000
[Sat Jun 22 13:58:20 2013] User source parameters:
  Position = (321.4, 317.8) = 17 3 2.67 78 40 41.5
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source aperture counts = 1425.6 +/- 56.4
  Background aperture counts = 1644.4
  Rate = 0.09 +/- 0.003

[Sat Jun 22 13:58:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:24 2013] Using photon index=1.80, rate=0.00988, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11.arf
[Sat Jun 22 13:58:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:24 2013] Updating source flux to 1e-13
[Sat Jun 22 13:58:39 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete