[Sat Jun 22 09:23:04 2013] Detection parameters:
  Position = (268.4, 288.5) = 17 4 20.77 78 38 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.9 +/- 29.9
  Background counts = 217.2
  Rate = 0.02 +/- 0.003

[Sat Jun 22 09:23:10 2013] Off-axis axis estimate = 2.29'
[Sat Jun 22 09:24:12 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:12 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Sat Jun 22 09:24:12 2013] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Sat Jun 22 09:24:12 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.58"
[Sat Jun 22 09:24:13 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 22 09:24:13 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 22 09:24:13 2013] Fit fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 09:24:15 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 22 09:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 09:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:24 2013] Source 1 is offset by -1.856014 and 6.062804 pixels which is larger than
2 X fitted extent = 0.823168 x 0.823168, not incorporating fit results
[Sat Jun 22 09:25:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:24 2013] Assessing source extent using major
[Sat Jun 22 09:25:24 2013] Source does appear to be extended
[Sat Jun 22 09:25:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:55 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:55 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Sat Jun 22 09:25:55 2013] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Sat Jun 22 09:25:55 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.58"
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 22 09:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 09:25:56 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 22 09:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 09:25:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 09:25:57 2013] fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 22 09:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 09:25:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:50 2013] Source 1 is offset by -6.550639 and -7.488231 pixels which is larger than
2 X fitted extent = 0.870708 x 0.870708, not incorporating fit results
[Sat Jun 22 09:26:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:50 2013] Assessing source extent using major
[Sat Jun 22 09:26:50 2013] Source does appear to be extended
[Sat Jun 22 09:26:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:27:16 2013] XMMSAS src. selection expression = ellipse(23303.608398, 25049.037933, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing source region out to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 22 12:27:16 2013] Extracting stamp from image fullrun_mos2_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (231, 251) - (306, 326)
[Sat Jun 22 12:27:16 2013] XMMSAS bgd. selection expression = annulus(23303.608398, 25049.037933, 1087.500000, 2175.000000, X, Y) && !ellipse(25605.863953, 27058.202148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.552795, 26554.338654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.480865, 25871.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.085800, 25137.926800, 1083.376031, 1083.376031, 0.000000, X, Y) && !ellipse(24316.876434, 27364.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20798.620117, 24203.355347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21349.047516, 25016.550995, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:27:16 2013] Writing fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 22 12:27:21 2013] Mean detx,y = (-706.35, 395.77) 
[Sat Jun 22 12:27:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:27:33 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:27:33 2013] Setting source spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 22 12:27:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 22 12:41:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 12:41:51 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:15 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:15 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1747.00
[Sat Jun 22 13:58:15 2013] Total counts from fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9644.00
[Sat Jun 22 13:58:15 2013] Got source and background scale factors 1128552.000000, 7905072.000000
[Sat Jun 22 13:58:15 2013] User source parameters:
  Position = (268.4, 288.5) = 17 4 20.77 78 38 24.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 370.2 +/- 42.8
  Background aperture counts = 1376.8
  Rate = 0.02 +/- 0.003

[Sat Jun 22 13:58:15 2013] Updating counts from extracted products
[Sat Jun 22 13:58:15 2013] Set source signif. to 370.19/37.11 = 9.98
[Sat Jun 22 13:58:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:23 2013] Using photon index=1.80, rate=0.0221, arf fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 22 13:58:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:23 2013] Updating source flux to 2.8e-13
[Sat Jun 22 13:58:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:51 2013] xmm0112500201/analysis//spectral/fullrun_mos2_xmm0112500201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete