[Sat Jun 22 09:23:03 2013] Detection parameters:
  Position = (313.8, 288.0) = 17 3 14.00 78 38 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.9 +/- 21.8
  Background counts = 151.2
  Rate = 0.007 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 1.34'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 7.10"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 7.10"
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun 22 09:24:09 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src38 appears to have run properly
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun 22 09:24:11 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 55 is offset by -4.350385 and 2.134066 pixels which is larger than
2 X fitted extent = 1.322791 x 1.322791, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Source 55 is offset by -4.341742 and 2.124287 pixels which is larger than
2 X fitted extent = 1.331977 x 1.331977, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:03 2013] Source is confused with source 11
[Sat Jun 22 09:25:03 2013] Source is confused with source 32
[Sat Jun 22 09:25:52 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 7.10"
[Sat Jun 22 09:25:52 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.10"
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 22 09:25:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 22 09:25:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 09:25:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 22 09:25:55 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 22 09:26:35 2013] Source 55 is offset by -4.329949 and 2.126562 pixels which is larger than
2 X fitted extent = 1.252143 x 1.252143, not incorporating fit results
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:47 2013] XMMSAS src. selection expression = ellipse(27248.716431, 25007.592926, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_src.reg
[Sat Jun 22 10:46:47 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (276, 251) - (351, 326)
[Sat Jun 22 10:46:47 2013] XMMSAS bgd. selection expression = annulus(27248.716431, 25007.592926, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.265200, 24871.290200, 858.696025, 858.696025, 0.000000, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(29613.290000, 25096.092000, 603.500017, 603.500017, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29444.114492, 23881.476200, 572.539216, 572.539216, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.282000, 24788.994000, 1183.544034, 1183.544034, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.525055, 26754.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.709137, 26236.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.157410, 27184.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.369598, 25790.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.738800, 27172.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30197.227356, 25529.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y) && !ellipse(23881.660000, 25022.578000, 1786.576051, 1786.576051, 0.000000, X, Y) && !ellipse(25277.654541, 27191.556305, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55.gif
[Sat Jun 22 10:56:04 2013] Mean detx,y = (-1265.38, -2944.90) 
[Sat Jun 22 10:56:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:56:23 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:56:23 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Jun 22 10:56:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Jun 22 12:05:26 2013] Not generating rmf since there are only 98 counts
[Sat Jun 22 12:05:26 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:13 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:13 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 1748.00
[Sat Jun 22 13:58:13 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_bgd.pi.gz = 453.00
[Sat Jun 22 13:58:13 2013] Got source and background scale factors 1343180.000000, 456000.000000
[Sat Jun 22 13:58:13 2013] User source parameters:
  Position = (313.8, 288.0) = 17 3 14.00 78 38 27.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 413.7 +/- 42.8
  Background aperture counts = 1334.3
  Rate = 0.02 +/- 0.003

[Sat Jun 22 13:58:13 2013] Updating counts from extracted products
[Sat Jun 22 13:58:13 2013] Set source signif. to 413.66/36.53 = 11.32
[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.0246, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 2.8e-13
[Sat Jun 22 13:58:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete