[Sat Jun 22 09:23:02 2013] Detection parameters:
  Position = (287.2, 299.1) = 17 3 53.16 78 39 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.1 +/- 23.3
  Background counts = 202.4
  Rate = 0.006 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 0.82'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 6.84"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 6.84"
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45.csv
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45.csv
[Sat Jun 22 09:24:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jun 22 09:24:12 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 52 is offset by -2.705067 and -4.356083 pixels which is larger than
2 X fitted extent = 0.897361 x 0.897361, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Spatial fit model total counts = 2601.560000, observed total counts = 2600.000000
[Sat Jun 22 09:25:03 2013] Offset between fit and detection position for source 52 = 7.096524 pixels
[Sat Jun 22 09:25:03 2013] 2608.415000 total counts/ 2440.320000 bgd. counts: snr = 3.402761
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 7.096524 pixels
  Position = (281.7, 294.6) = 17 4 1.24 78 39 0.7
  Extent = 13.7 (13.7-27.3)", rotation angle = 0
  Source counts = 168.1 +/- 51.1
  Background counts = 2440.3
  Rate = 0.01 +/- 0.003
[Sat Jun 22 09:25:03 2013] Source 52 is offset by -3.386966 and -3.181218 pixels which is larger than
2 X fitted extent = 0.778979 x 0.778979, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Sat Jun 22 09:25:52 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.923
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 13.67"
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun 22 09:25:54 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun 22 09:25:55 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Jun 22 09:26:35 2013] Spatial fit model total counts = 3876.470000, observed total counts = 3876.000000
[Sat Jun 22 09:26:35 2013] Offset between fit and detection position for source 52 = 9.230707 pixels
[Sat Jun 22 09:26:35 2013] 3895.224000 total counts/ 3625.440000 bgd. counts: snr = 4.480596
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 9.230707 pixels
  Position = (275.1, 288.2) = 17 4 11.00 78 38 32.7
  Extent = 22.3 (12.3-27.3)", rotation angle = 0
  Source counts = 269.8 +/- 62.4
  Background counts = 3625.4
  Rate = 0.02 +/- 0.004
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:47 2013] XMMSAS src. selection expression = ellipse(23881.660000, 25022.578000, 1339.932039, 1339.932039, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_src.reg
[Sat Jun 22 10:46:47 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (198, 211) - (352, 365)
[Sat Jun 22 10:46:47 2013] XMMSAS bgd. selection expression = annulus(23881.660000, 25022.578000, 2233.220064, 4466.440129, X, Y) && !ellipse(28523.265200, 24871.290200, 858.696025, 858.696025, 0.000000, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.282000, 24788.994000, 1183.544034, 1183.544034, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.525055, 26754.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.709137, 26236.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.157410, 27184.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.369598, 25790.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.716431, 25007.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.191254, 27194.965363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y) && !ellipse(27902.066040, 28313.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.567932, 28381.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25277.654541, 27191.556305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21191.649414, 24310.594635, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52.gif
[Sat Jun 22 10:58:34 2013] Mean detx,y = (352.29, 11.03) 
[Sat Jun 22 10:58:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:58:55 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:58:56 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jun 22 10:58:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jun 22 13:58:14 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:14 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 7969.00
[Sat Jun 22 13:58:14 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_bgd.pi.gz = 24604.00
[Sat Jun 22 13:58:14 2013] Got source and background scale factors 5634972.000000, 30066440.000000
[Sat Jun 22 13:58:14 2013] User source parameters:
  Position = (275.1, 288.2) = 17 4 11.00 78 38 32.7
  Extent = 22.3 (12.3-27.3)", rotation angle = 0
  Source aperture counts = 3357.8 +/- 90.3
  Background aperture counts = 4611.2
  Rate = 0.2 +/- 0.005

[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.016, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 1.5e-13
[Sat Jun 22 13:58:28 2013] Flag b found in src. 52 procflags, skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete