[Sat Jun 22 09:23:01 2013] Detection parameters:
  Position = (342.8, 312.9) = 17 2 31.06 78 40 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.9 +/- 17.6
  Background counts = 90.6
  Rate = 0.007 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 3.38'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 8.12"
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 09:24:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jun 22 09:24:11 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 44 is offset by -2.962124 and 6.182983 pixels which is larger than
2 X fitted extent = 1.334386 x 1.334386, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Source 44 is offset by 6.298308 and -2.285084 pixels which is larger than
2 X fitted extent = 0.933435 x 0.933435, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:52 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Sat Jun 22 09:25:52 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.12"
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src24.ximg exists
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Jun 22 09:25:54 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src24 appears to have run properly
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jun 22 09:25:55 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Jun 22 09:26:35 2013] Source 44 is offset by -4.189669 and 2.181833 pixels which is larger than
2 X fitted extent = 0.933352 x 7.466805, not incorporating fit results
[Sat Jun 22 09:26:35 2013] Source 44 is offset by 6.667526 and -1.926489 pixels which is larger than
2 X fitted extent = 5.808920 x 5.808920, not incorporating fit results
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:47 2013] XMMSAS src. selection expression = ellipse(29775.738800, 27172.729492, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_src.reg
[Sat Jun 22 10:46:47 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (305, 275) - (380, 350)
[Sat Jun 22 10:46:47 2013] XMMSAS bgd. selection expression = annulus(29775.738800, 27172.729492, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.265200, 24871.290200, 858.696025, 858.696025, 0.000000, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(29613.290000, 25096.092000, 603.500017, 603.500017, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.282000, 24788.994000, 1183.544034, 1183.544034, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.157410, 27184.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.716431, 25007.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30197.227356, 25529.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y) && !ellipse(27902.066040, 28313.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.567932, 28381.187317, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44.gif
[Sat Jun 22 10:55:36 2013] Mean detx,y = (-4305.63, -4133.23) 
[Sat Jun 22 10:55:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:55:56 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:55:56 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jun 22 10:55:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun 22 12:05:19 2013] Not generating rmf since there are only 83 counts
[Sat Jun 22 12:05:19 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:12 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:12 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 1048.00
[Sat Jun 22 13:58:12 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_bgd.pi.gz = 2594.00
[Sat Jun 22 13:58:13 2013] Got source and background scale factors 1341244.000000, 5479384.000000
[Sat Jun 22 13:58:13 2013] User source parameters:
  Position = (342.8, 312.9) = 17 2 31.06 78 40 18.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 413.0 +/- 33.4
  Background aperture counts = 635.0
  Rate = 0.02 +/- 0.002

[Sat Jun 22 13:58:13 2013] Updating counts from extracted products
[Sat Jun 22 13:58:13 2013] Set source signif. to 413.04/25.20 = 16.39
[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.0246, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 3.4e-13
[Sat Jun 22 13:58:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete