[Sat Jun 22 09:23:01 2013] Detection parameters:
  Position = (329.6, 326.8) = 17 2 50.56 78 41 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 17.1
  Background counts = 96.7
  Rate = 0.006 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 3.05'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.152
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 7.96"
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Jun 22 09:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 09:24:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:12 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Jun 22 09:24:12 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Jun 22 09:24:12 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 36 is offset by -6.099557 and 2.647540 pixels which is larger than
2 X fitted extent = 0.918915 x 0.918915, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Spatial fit model total counts = 1703.560000, observed total counts = 1702.000000
[Sat Jun 22 09:25:03 2013] Offset between fit and detection position for source 36 = 0.568932 pixels
[Sat Jun 22 09:25:03 2013] Warning, changing simple spatial fit ID from 53 to 54
[Sat Jun 22 09:25:03 2013] 1639.904400 total counts/ 1603.130000 bgd. counts: snr = 0.918462
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.568932 pixels
  Position = (329.4, 327.4) = 17 2 50.72 78 41 23.2
  Extent = 5.2 (2.0-15.6)", rotation angle = 0
  Source counts = 36.8 +/- 40.5
  Background counts = 1603.1
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability