[Sat Jun 22 09:22:59 2013] Detection parameters:
  Position = (308.5, 313.0) = 17 3 21.74 78 40 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 21.7
  Background counts = 142.9
  Rate = 0.008 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 1.28'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.107
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.07"
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 22 09:24:09 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 22 09:24:09 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src30 appears to have run properly
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 22 09:24:11 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 22 09:24:11 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 24 is offset by 1.430568 and -1.356772 pixels which is larger than
2 X fitted extent = 0.785062 x 0.785062, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Warning, spatial fit 30 centroid is now closest to src. 19
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:03 2013] Source is confused with source 26
[Sat Jun 22 09:25:52 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sat Jun 22 09:25:52 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.107
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.07"
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun 22 09:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21.csv
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun 22 09:25:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21.csv
[Sat Jun 22 09:25:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun 22 09:25:55 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Jun 22 09:26:35 2013] Source 24 is offset by 0.711448 and -6.045921 pixels which is larger than
2 X fitted extent = 0.812929 x 0.812929, not incorporating fit results
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:46 2013] XMMSAS src. selection expression = ellipse(26789.157410, 27184.132843, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 22 10:46:46 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (271, 276) - (346, 351)
[Sat Jun 22 10:46:46 2013] XMMSAS bgd. selection expression = annulus(26789.157410, 27184.132843, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.265200, 24871.290200, 858.696025, 858.696025, 0.000000, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.282000, 24788.994000, 1183.544034, 1183.544034, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.525055, 26754.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.709137, 26236.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.369598, 25790.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.738800, 27172.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.716431, 25007.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.191254, 27194.965363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y) && !ellipse(27902.066040, 28313.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.660000, 25022.578000, 1786.576051, 1786.576051, 0.000000, X, Y) && !ellipse(27251.567932, 28381.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25277.654541, 27191.556305, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24.gif
[Sat Jun 22 10:54:56 2013] Mean detx,y = (-2912.49, -1536.57) 
[Sat Jun 22 10:54:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:55:08 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:55:08 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 22 10:55:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun 22 12:05:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 12:05:08 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:12 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:12 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1675.00
[Sat Jun 22 13:58:12 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1433.00
[Sat Jun 22 13:58:12 2013] Got source and background scale factors 1342360.000000, 1773580.000000
[Sat Jun 22 13:58:12 2013] User source parameters:
  Position = (308.5, 313.0) = 17 3 21.74 78 40 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 590.4 +/- 41.9
  Background aperture counts = 1084.6
  Rate = 0.04 +/- 0.002

[Sat Jun 22 13:58:12 2013] Updating counts from extracted products
[Sat Jun 22 13:58:12 2013] Set source signif. to 590.41/32.93 = 17.93
[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.0351, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 3.9e-13
[Sat Jun 22 13:58:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete