[Sat Jun 22 09:22:59 2013] Detection parameters:
  Position = (434.2, 319.0) = 17 0 16.01 78 40 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 13.5
  Background counts = 25.3
  Rate = 0.005 +/- 0.0008

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 9.95'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Sat Jun 22 09:24:07 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.898
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 11.41"
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58.ximg exists
[Sat Jun 22 09:24:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58.csv
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat Jun 22 09:24:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58.csv
[Sat Jun 22 09:24:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:12 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat Jun 22 09:24:12 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat Jun 22 09:24:12 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Sat Jun 22 09:25:03 2013] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.275911 pixels away
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:52 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Sat Jun 22 09:25:52 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.898
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 11.41"
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37.ximg exists
[Sat Jun 22 09:25:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37.csv
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Jun 22 09:25:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37.csv
[Sat Jun 22 09:25:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Jun 22 09:25:55 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Jun 22 09:25:55 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Jun 22 09:26:35 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.037984 pixels away
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:47 2013] XMMSAS src. selection expression = ellipse(37726.609009, 27703.414093, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun 22 10:46:47 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (397, 281) - (472, 356)
[Sat Jun 22 10:46:47 2013] XMMSAS bgd. selection expression = annulus(37726.609009, 27703.414093, 1087.500000, 2175.000000, X, Y)
[Sat Jun 22 10:46:47 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18.gif
[Sat Jun 22 11:00:12 2013] Mean detx,y = (-8598.54, -10890.64) 
[Sat Jun 22 11:00:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 11:00:29 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 11:00:29 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun 22 11:00:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun 22 12:27:08 2013] Not generating rmf since there are only 82 counts
[Sat Jun 22 12:27:08 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:14 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:14 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 250.00
[Sat Jun 22 13:58:14 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1567.00
[Sat Jun 22 13:58:15 2013] Got source and background scale factors 1252188.000000, 10796556.000000
[Sat Jun 22 13:58:15 2013] User source parameters:
  Position = (434.2, 319.0) = 17 0 16.01 78 40 42.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.3 +/- 16.8
  Background aperture counts = 181.7
  Rate = 0.004 +/- 0.001

[Sat Jun 22 13:58:15 2013] Updating counts from extracted products
[Sat Jun 22 13:58:15 2013] Set source signif. to 68.26/13.48 = 5.06
[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.00406, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 1.1e-13
[Sat Jun 22 13:58:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete