[Sat Jun 22 09:22:59 2013] Detection parameters:
  Position = (328.7, 286.1) = 17 2 51.99 78 38 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.8 +/- 24.1
  Background counts = 114.7
  Rate = 0.01 +/- 0.002

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 2.37'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.61"
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 22 09:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 22 09:24:10 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 22 09:25:03 2013] Spatial fit model total counts = 2217.360000, observed total counts = 2217.000000
[Sat Jun 22 09:25:03 2013] Offset between fit and detection position for source 17 = 0.438379 pixels
[Sat Jun 22 09:25:03 2013] 2200.076000 total counts/ 2077.750000 bgd. counts: snr = 2.683627
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.438379 pixels
  Position = (328.4, 286.4) = 17 2 52.44 78 38 25.1
  Extent = 10.7 (5.3-15.2)", rotation angle = 0
  Source counts = 122.3 +/- 46.9
  Background counts = 2077.8
  Rate = 0.007 +/- 0.003
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:03 2013] Source is confused with source 13
[Sat Jun 22 09:25:03 2013] Source is confused with source 14
[Sat Jun 22 09:25:03 2013] Source is confused with source 33
[Sat Jun 22 09:25:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Sat Jun 22 09:25:52 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.73"
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 22 09:25:53 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 22 09:25:54 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 22 09:26:35 2013] Warning, spatial fit 2 centroid is now closest to src. 33
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:46 2013] XMMSAS src. selection expression = ellipse(28523.265200, 24871.290200, 644.022019, 644.022019, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun 22 10:46:46 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (291, 249) - (365, 323)
[Sat Jun 22 10:46:46 2013] XMMSAS bgd. selection expression = annulus(28523.265200, 24871.290200, 1073.370031, 2146.740062, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(29613.290000, 25096.092000, 603.500017, 603.500017, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29444.114492, 23881.476200, 572.539216, 572.539216, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.282000, 24788.994000, 1183.544034, 1183.544034, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.525055, 26754.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.709137, 26236.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.157410, 27184.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.369598, 25790.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.738800, 27172.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.716431, 25007.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30197.227356, 25529.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17.gif
[Sat Jun 22 10:46:54 2013] Mean detx,y = (-1742.60, -4140.40) 
[Sat Jun 22 10:46:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:47:17 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:47:18 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 22 10:47:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun 22 13:58:09 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:09 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1529.00
[Sat Jun 22 13:58:09 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 810.00
[Sat Jun 22 13:58:09 2013] Got source and background scale factors 1302024.000000, 1414320.000000
[Sat Jun 22 13:58:09 2013] User source parameters:
  Position = (328.4, 286.4) = 17 2 52.44 78 38 25.1
  Extent = 10.7 (5.3-15.2)", rotation angle = 0
  Source aperture counts = 783.3 +/- 40.1
  Background aperture counts = 745.7
  Rate = 0.05 +/- 0.002

[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.00727, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 9.3e-14
[Sat Jun 22 13:58:28 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete