[Sat Jun 22 09:22:58 2013] Detection parameters:
  Position = (334.0, 290.0) = 17 2 44.25 78 38 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.0 +/- 20.3
  Background counts = 104.2
  Rate = 0.01 +/- 0.002

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 2.65'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Jun 22 09:24:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.75"
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 09:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 22 09:24:10 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jun 22 09:25:03 2013] Source 13 is offset by -5.375075 and -0.094309 pixels which is larger than
2 X fitted extent = 1.007522 x 1.007522, not incorporating fit results
[Sat Jun 22 09:25:03 2013] Spatial fit model total counts = 1861.280000, observed total counts = 1858.000000
[Sat Jun 22 09:25:03 2013] Offset between fit and detection position for source 13 = 5.861335 pixels
[Sat Jun 22 09:25:03 2013] Warning, changing simple spatial fit ID from 13 to 23
[Sat Jun 22 09:25:03 2013] 1834.520000 total counts/ 1425.530000 bgd. counts: snr = 10.832396
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 5.861335 pixels
  Position = (329.0, 286.9) = 17 2 51.56 78 38 26.9
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 409.0 +/- 42.8
  Background counts = 1425.5
  Rate = 0.02 +/- 0.003
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:03 2013] Source is confused with source 17
[Sat Jun 22 09:25:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 15.71"
[Sat Jun 22 09:25:52 2013] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.946
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 15.71"
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 09:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 09:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 09:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 09:25:54 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jun 22 09:26:35 2013] Source 13 is offset by -5.225701 and -2.314701 pixels which is larger than
2 X fitted extent = 0.898051 x 0.898051, not incorporating fit results
[Sat Jun 22 09:26:35 2013] Warning, spatial fit 11 centroid is now closest to src. 10
[Sat Jun 22 09:26:35 2013] Spatial fit model total counts = 2442.690000, observed total counts = 2442.000000
[Sat Jun 22 09:26:35 2013] Offset between fit and detection position for source 13 = 1.364605 pixels
[Sat Jun 22 09:26:35 2013] Warning, changing simple spatial fit ID from 11 to 13
[Sat Jun 22 09:26:35 2013] 2450.768000 total counts/ 2272.620000 bgd. counts: snr = 3.736952
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.364605 pixels
  Position = (329.1, 285.5) = 17 2 51.44 78 38 21.0
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source counts = 178.1 +/- 49.5
  Background counts = 2272.6
  Rate = 0.01 +/- 0.003
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:46 2013] XMMSAS src. selection expression = ellipse(28582.282000, 24788.994000, 887.658026, 887.658026, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 22 10:46:46 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (278, 234) - (380, 337)
[Sat Jun 22 10:46:46 2013] XMMSAS bgd. selection expression = annulus(28582.282000, 24788.994000, 1479.430043, 2958.860085, X, Y) && !ellipse(28523.265200, 24871.290200, 858.696025, 858.696025, 0.000000, X, Y) && !ellipse(27609.950000, 25424.600000, 2513.632072, 2513.632072, 0.000000, X, Y) && !ellipse(27319.236000, 25657.930200, 1149.608033, 1149.608033, 0.000000, X, Y) && !ellipse(26586.140000, 25571.168600, 1106.720032, 1106.720032, 0.000000, X, Y) && !ellipse(29613.290000, 25096.092000, 603.500017, 603.500017, 0.000000, X, Y) && !ellipse(27718.935394, 26396.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29444.114492, 23881.476200, 572.539216, 572.539216, 0.000000, X, Y) && !ellipse(27138.567230, 26485.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28052.632751, 25000.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.525055, 26754.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.748474, 27174.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.568207, 25367.059998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.709137, 26236.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.157410, 27184.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.369598, 25790.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.738800, 27172.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.716431, 25007.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30197.227356, 25529.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.896000, 25883.452000, 1229.128035, 1229.128035, 0.000000, X, Y) && !ellipse(27902.066040, 28313.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.660000, 25022.578000, 1786.576051, 1786.576051, 0.000000, X, Y) && !ellipse(27251.567932, 28381.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25277.654541, 27191.556305, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13.gif
[Sat Jun 22 10:51:52 2013] Mean detx,y = (-1719.68, -4196.29) 
[Sat Jun 22 10:51:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:52:29 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:52:30 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 22 10:52:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 22 13:58:11 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:11 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 2634.00
[Sat Jun 22 13:58:11 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 3556.00
[Sat Jun 22 13:58:11 2013] Got source and background scale factors 2459080.000000, 6869268.000000
[Sat Jun 22 13:58:11 2013] User source parameters:
  Position = (329.1, 285.5) = 17 2 51.44 78 38 21.0
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source aperture counts = 1361.0 +/- 52.3
  Background aperture counts = 1273.0
  Rate = 0.08 +/- 0.003

[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 1.3e-13
[Sat Jun 22 13:58:28 2013] Flag b found in src. 13 procflags, skipping spectral fitting
[Sat Jun 22 13:58:28 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete