[Sat Jun 22 09:22:57 2013] Detection parameters:
  Position = (129.5, 305.1) = 17 7 45.69 78 39 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.6 +/- 20.8
  Background counts = 25.6
  Rate = 0.01 +/- 0.001

[Sat Jun 22 09:23:03 2013] Off-axis axis estimate = 12.25'
[Sat Jun 22 09:24:07 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:24:07 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun 22 09:24:07 2013] source mask rpix=2.9, npix_max = 45, mask sum = 46, frac = 1.003
[Sat Jun 22 09:24:07 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.56"
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 22 09:24:08 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 22 09:24:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 22 09:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 22 09:24:10 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 22 09:24:10 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 22 09:25:03 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.216961 pixels away
[Sat Jun 22 09:25:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:25:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:25:03 2013] Assessing source extent using major
[Sat Jun 22 09:25:03 2013] Source does appear to be extended
[Sat Jun 22 09:25:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:52 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:25:52 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun 22 09:25:52 2013] source mask rpix=2.9, npix_max = 45, mask sum = 46, frac = 1.003
[Sat Jun 22 09:25:52 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.56"
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 22 09:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 09:25:53 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 22 09:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 09:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 22 09:25:54 2013] fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 22 09:25:54 2013] Fit fullrun_mos1_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Jun 22 09:26:35 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.477636 pixels away
[Sat Jun 22 09:26:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:35 2013] Assessing source extent using major
[Sat Jun 22 09:26:35 2013] Source does appear to be extended
[Sat Jun 22 09:26:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:46:46 2013] XMMSAS src. selection expression = ellipse(11222.163086, 26499.270691, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing source region out to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 22 10:46:46 2013] Extracting stamp from image fullrun_mos1_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (92, 268) - (167, 343)
[Sat Jun 22 10:46:46 2013] XMMSAS bgd. selection expression = annulus(11222.163086, 26499.270691, 1087.500000, 2175.000000, X, Y)
[Sat Jun 22 10:46:46 2013] Writing fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 22 10:48:58 2013] Mean detx,y = (5079.39, 11845.14) 
[Sat Jun 22 10:49:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 10:49:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 10:49:18 2013] Setting source spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 22 10:49:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 22 11:39:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 11:39:37 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:09 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:09 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 377.00
[Sat Jun 22 13:58:09 2013] Total counts from fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1803.00
[Sat Jun 22 13:58:09 2013] Got source and background scale factors 1203788.000000, 10839592.000000
[Sat Jun 22 13:58:09 2013] User source parameters:
  Position = (129.5, 305.1) = 17 7 45.69 78 39 40.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 176.8 +/- 20.4
  Background aperture counts = 200.2
  Rate = 0.01 +/- 0.001

[Sat Jun 22 13:58:09 2013] Updating counts from extracted products
[Sat Jun 22 13:58:09 2013] Set source signif. to 176.77/14.15 = 12.49
[Sat Jun 22 13:58:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:15 2013] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 22 13:58:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:15 2013] Updating source flux to 2.3e-13
[Sat Jun 22 13:58:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:58:39 2013] xmm0112500201/analysis//spectral/fullrun_mos1_xmm0112500201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete