[Sun May  5 00:40:07 2013] Detection parameters:
  Position = (327.1, 215.1) = 16 56 33.59 78 54 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 12.6
  Background counts = 7.1
  Rate = 0.006 +/- 0.0007

[Sun May  5 00:40:07 2013] Off-axis axis estimate = 6.39'
[Sun May  5 00:40:37 2013] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Sun May  5 00:40:37 2013] Initial guess for spatial extent in simple fitting = 9.62"
[Sun May  5 00:40:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.952
[Sun May  5 00:40:37 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.62"
[Sun May  5 00:40:38 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6.ximg exists
[Sun May  5 00:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6.csv
[Sun May  5 00:40:38 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May  5 00:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6.csv
[Sun May  5 00:40:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 00:40:38 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May  5 00:40:38 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May  5 00:40:38 2013] Fit fullrun_mos2_xmm0112500101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun May  5 00:40:57 2013] Spatial fit model total counts = 152.952000, observed total counts = 146.000000
[Sun May  5 00:40:57 2013] Offset between fit and detection position for source 26 = 0.147444 pixels
[Sun May  5 00:40:57 2013] 156.372900 total counts/ 88.076200 bgd. counts: snr = 7.277303
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.147444 pixels
  Position = (327.1, 215.0) = 16 56 33.54 78 54 13.1
  Extent = 4.6 (3.6-5.6)", rotation angle = 0
  Source counts = 68.3 +/- 12.5
  Background counts = 88.1
  Rate = 0.003 +/- 0.0005
[Sun May  5 00:40:57 2013] Vigneting correction estimate = 1.000000
[Sun May  5 00:40:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 00:40:57 2013] Assessing source extent using major axis lower bound
[Sun May  5 00:40:57 2013] Source does appear to be extended
[Sun May  5 00:40:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 00:41:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 00:41:12 2013] Initial guess for spatial extent in simple fitting = 4.62"
[Sun May  5 00:41:12 2013] source mask rpix=1.1, npix_max = 9, mask sum = 10, frac = 1.023
[Sun May  5 00:41:12 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 4.62"
[Sun May  5 00:41:12 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6.ximg exists
[Sun May  5 00:41:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6.csv
[Sun May  5 00:41:12 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May  5 00:41:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6.csv
[Sun May  5 00:41:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 00:41:12 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May  5 00:41:12 2013] fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May  5 00:41:12 2013] Fit fullrun_mos2_xmm0112500101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May  5 00:41:31 2013] Spatial fit model total counts = 153.171000, observed total counts = 146.000000
[Sun May  5 00:41:31 2013] Offset between fit and detection position for source 26 = 0.013393 pixels
[Sun May  5 00:41:31 2013] 156.763900 total counts/ 88.308400 bgd. counts: snr = 7.284627
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.013393 pixels
  Position = (327.1, 215.0) = 16 56 33.53 78 54 13.2
  Extent = 4.6 (3.6-5.7)", rotation angle = 0
  Source counts = 68.5 +/- 12.5
  Background counts = 88.3
  Rate = 0.003 +/- 0.0005
[Sun May  5 00:41:31 2013] Vigneting correction estimate = 1.000000
[Sun May  5 00:41:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 00:41:31 2013] Assessing source extent using major axis lower bound
[Sun May  5 00:41:31 2013] Source does appear to be extended
[Sun May  5 00:41:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 01:05:10 2013] XMMSAS src. selection expression = ellipse(28412.849460, 18656.910800, 276.755408, 276.755408, 0.000000, X, Y)
[Sun May  5 01:05:10 2013] Not overwriting source region fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src.reg
[Sun May  5 01:05:10 2013] Extracting stamp from image fullrun_mos2_xmm0112500101_pi300-10000_cl_sm2.00.img.gz, (311, 199) - (343, 231)
[Sun May  5 01:05:10 2013] XMMSAS bgd. selection expression = annulus(28412.849460, 18656.910800, 461.259013, 922.518027, X, Y)
[Sun May  5 01:05:10 2013] Writing fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26.gif
[Sun May  5 01:05:11 2013] ../../xmm0112500101/products/events/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0112500101/products/events/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun May  5 01:05:11 2013] Mean detx,y = (-3780.85, -7483.07) 
[Sun May  5 01:05:11 2013] ../../xmm0112500101/products/images/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0112500101/products/images/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun May  5 01:05:11 2013] ../../xmm0112500101/products/spectra/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0112500101/products/spectra/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun May  5 01:05:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun May  5 01:05:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun May  5 01:05:11 2013] ../../xmm0112500101/products/lightcurves/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0112500101/products/lightcurves/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun May  5 01:05:14 2013] Not generating rmf since there are only 68 counts
[Sun May  5 01:05:14 2013] rmf not generated due to insufficient counts
[Sun May  5 01:05:14 2013] fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Sun May  5 01:06:01 2013] Updating aperture counts using extracted products
[Sun May  5 01:06:01 2013] Total counts from fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 82.00
[Sun May  5 01:06:01 2013] Total counts from fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 60.00
[Sun May  5 01:06:02 2013] Got source and background scale factors 234152.000000, 1689636.000000
[Sun May  5 01:06:02 2013] User source parameters:
  Position = (327.1, 215.0) = 16 56 33.53 78 54 13.2
  Extent = 4.6 (3.6-5.7)", rotation angle = 0
  Source aperture counts = 73.7 +/- 10.1
  Background aperture counts = 8.3
  Rate = 0.003 +/- 0.0004

[Sun May  5 01:06:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 01:06:05 2013] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26.arf
[Sun May  5 01:06:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 01:06:05 2013] Updating source flux to 5.2e-14
[Sun May  5 01:06:08 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 01:06:09 2013] xmm0112500101/analysis//spectral/fullrun_mos2_xmm0112500101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete