[Tue Aug  7 10:17:15 2012] Detection parameters:
  Position = (252.4, 347.2) = 16 40 59.49 -24 36 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.5 +/- 16.8
  Background counts = 7.0
  Rate = 0.02 +/- 0.001

[Tue Aug  7 10:17:15 2012] Off-axis axis estimate = 4.86'
[Tue Aug  7 11:06:59 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:06:59 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Aug  7 11:06:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.893
[Tue Aug  7 11:06:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.86"
[Tue Aug  7 11:26:31 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Aug  7 11:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2.csv
[Tue Aug  7 11:26:31 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Aug  7 11:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2.csv
[Tue Aug  7 11:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:26:31 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Aug  7 11:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Aug  7 11:26:31 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Aug  7 11:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Aug  7 11:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112480301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:26:44 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.347866 pixels away
[Tue Aug  7 11:26:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:26:44 2012] Assessing source extent using major
[Tue Aug  7 11:26:44 2012] Source does appear to be extended
[Tue Aug  7 11:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:11:59 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 12:11:59 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Aug  7 12:11:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.893
[Tue Aug  7 12:11:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.86"
[Tue Aug  7 12:29:26 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Aug  7 12:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2.csv
[Tue Aug  7 12:29:26 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Aug  7 12:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2.csv
[Tue Aug  7 12:29:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:29:26 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Aug  7 12:29:26 2012] fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Aug  7 12:29:26 2012] Fit fullrun_mos2_xmm0112480301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Aug  7 12:29:38 2012] Spatial fit model total counts = 226.494000, observed total counts = 219.000000
[Tue Aug  7 12:29:38 2012] Offset between fit and detection position for source 1 = 0.574028 pixels
[Tue Aug  7 12:29:38 2012] 223.654800 total counts/ 78.246800 bgd. counts: snr = 16.438228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.574028 pixels
  Position = (252.3, 347.8) = 16 40 59.53 -24 36 49.1
  Extent = 4.4 (3.7-5.0)", rotation angle = 0
  Source counts = 145.4 +/- 15.0
  Background counts = 78.2
  Rate = 0.008 +/- 0.0009
[Tue Aug  7 12:29:38 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:29:38 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:29:38 2012] Source does appear to be extended
[Tue Aug  7 12:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 13:01:25 2012] XMMSAS src. selection expression = ellipse(21898.007800, 30208.241600, 262.326008, 262.326008, 0.000000, X, Y)
[Tue Aug  7 13:01:25 2012] Writing source region out to fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 13:01:25 2012] Extracting stamp from image fullrun_mos2_xmm0112480301_pi300-10000_cl_sm2.00.img.gz, (237, 333) - (267, 363)
[Tue Aug  7 13:01:25 2012] XMMSAS bgd. selection expression = annulus(21898.007800, 30208.241600, 437.210013, 874.420025, X, Y)
[Tue Aug  7 13:01:25 2012] Writing fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 13:04:10 2012] Mean detx,y = (-2262.65, -6383.61) 
[Tue Aug  7 13:04:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 13:04:27 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 13:04:27 2012] Setting source spectrum file to fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 13:04:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 13:13:14 2012] Updating aperture counts using extracted products
[Tue Aug  7 13:13:14 2012] Error reading totcts from fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 13:13:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:13:14 2012] Using photon index=1.80, rate=0.00828, arf fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:13:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:13:14 2012] Updating source flux to 1.4e-13
[Tue Aug  7 13:13:35 2012] Reading fit data from xmm0112480301/analysis//spectral/fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 13:13:35 2012] Spectral fit parameter nH value = 1.03207e+13
[Tue Aug  7 13:13:35 2012] Spectral fit parameter PhoIndex value = 1.37124
[Tue Aug  7 13:13:35 2012] Failed to get F(0.3-8.0) from xmm0112480301/analysis//spectral/fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 13:13:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:13:35 2012] Using Nh = 1e+13, photon index=1.37, rate=0.00828, arf fullrun_mos2_xmm0112480301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:13:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:13:35 2012] Updating source flux to 1.8e-13