[Sat Aug  4 10:11:17 2012] Detection parameters:
  Position = (496.4, 330.4) = 6 46 37.46 -44 15 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 536.5 +/- 30.7
  Background counts = 24.2
  Rate = 0.07 +/- 0.004

[Sat Aug  4 10:11:18 2012] Off-axis axis estimate = 14.54'
[Sat Aug  4 10:12:54 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 10:12:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 10:12:54 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sat Aug  4 10:12:54 2012] source mask rpix=3.1, npix_max = 53, mask sum = 44, frac = 0.826
[Sat Aug  4 10:12:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.70"
[Sat Aug  4 10:40:16 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 10:40:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:40:16 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 10:40:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:40:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 10:40:16 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 10:40:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 10:40:16 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 10:40:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 10:40:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:25:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.543853 pixels away
[Sat Aug  4 11:25:51 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.081159 pixels away
[Sat Aug  4 11:25:51 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 11:25:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 11:25:51 2012] Assessing source extent using major
[Sat Aug  4 11:25:51 2012] Source does appear to be extended
[Sat Aug  4 11:25:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 11:25:51 2012] Source is confused with source 3
[Sat Aug  4 11:26:02 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 11:26:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 11:26:02 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sat Aug  4 11:26:02 2012] source mask rpix=3.1, npix_max = 53, mask sum = 44, frac = 0.826
[Sat Aug  4 11:26:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.70"
[Sat Aug  4 11:46:23 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 11:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:46:23 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 11:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:46:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:46:23 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 11:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 11:46:23 2012] fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 11:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 11:46:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 12:25:03 2012] Spatial fit model total counts = 1815.520000, observed total counts = 782.000000
[Sat Aug  4 12:25:03 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug  4 12:25:03 2012] Spatial fit model total counts = 699.873000, observed total counts = 642.000000
[Sat Aug  4 12:25:03 2012] Offset between fit and detection position for source 1 = 1.841214 pixels
[Sat Aug  4 12:25:03 2012] Warning, changing simple spatial fit ID from 1 to 3
[Sat Aug  4 12:25:03 2012] 519.406500 total counts/ 49.274500 bgd. counts: snr = 66.974380
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.841214 pixels
  Position = (496.1, 328.6) = 6 46 37.59 -44 15 31.1
  Extent = 12.0 (10.7-13.6)", rotation angle = 0
  Source counts = 470.1 +/- 22.8
  Background counts = 49.3
  Rate = 0.08 +/- 0.004
[Sat Aug  4 12:25:03 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 12:25:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 12:25:03 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 12:25:03 2012] Source does appear to be extended
[Sat Aug  4 12:25:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 12:25:14 2012] XMMSAS src. selection expression = ellipse(43114.601640, 28538.732000, 720.906021, 720.906021, 0.000000, X, Y)
[Sat Aug  4 12:25:14 2012] Writing source region out to fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug  4 12:25:14 2012] Extracting stamp from image fullrun_pn_xmm0112450601_pi300-10000_cl_sm2.00.img.gz, (455, 287) - (538, 370)
[Sat Aug  4 12:25:14 2012] XMMSAS bgd. selection expression = annulus(43114.601640, 28538.732000, 1201.510035, 2403.020069, X, Y) && !ellipse(43142.162537, 28183.377014, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 12:25:14 2012] Writing fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1.gif
[Sat Aug  4 12:25:19 2012] Mean detx,y = (-17178.68, 7900.84) 
[Sat Aug  4 12:25:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 12:25:37 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 12:25:37 2012] Setting source spectrum file to fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 12:25:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug  4 13:27:09 2012] Updating aperture counts using extracted products
[Sat Aug  4 13:27:09 2012] Error reading totcts from fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 13:27:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:27:10 2012] Using photon index=1.80, rate=0.0807, arf fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 13:27:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:27:10 2012] Updating source flux to 8.3e-13
[Sat Aug  4 13:28:19 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat Aug  4 13:28:19 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Aug  4 13:28:44 2012] Reading fit data from xmm0112450601/analysis//spectral/fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug  4 13:28:44 2012] Spectral fit parameter nH value = 2.01206e+16
[Sat Aug  4 13:28:44 2012] Spectral fit parameter PhoIndex value = 1.96577
[Sat Aug  4 13:28:44 2012] Failed to get F(0.3-8.0) from xmm0112450601/analysis//spectral/fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 13:28:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:28:44 2012] Using Nh = 2e+16, photon index=1.97, rate=0.0807, arf fullrun_pn_xmm0112450601_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 13:28:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:28:44 2012] Updating source flux to 7.5e-13