[Sat Aug  4 10:11:37 2012] Detection parameters:
  Position = (235.9, 380.3) = 6 48 22.94 -44 11 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 787.8 +/- 33.8
  Background counts = 7.0
  Rate = 0.1 +/- 0.004

[Sat Aug  4 10:11:38 2012] Off-axis axis estimate = 7.47'
[Sat Aug  4 10:40:16 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 10:40:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 10:40:16 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Aug  4 10:40:16 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Sat Aug  4 10:40:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.16"
[Sat Aug  4 11:01:21 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 11:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 11:01:21 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 11:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 11:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:01:21 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 11:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 11:01:21 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 11:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 11:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112450601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:25:53 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.768256 pixels away
[Sat Aug  4 11:25:53 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 11:25:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 11:25:53 2012] Assessing source extent using major
[Sat Aug  4 11:25:53 2012] Source does appear to be extended
[Sat Aug  4 11:25:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 11:46:23 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 11:46:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 11:46:23 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Aug  4 11:46:23 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Sat Aug  4 11:46:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.16"
[Sat Aug  4 12:04:35 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 12:04:35 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 12:04:35 2012] Fit fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Aug  4 12:04:35 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 12:04:35 2012] fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 12:04:35 2012] Fit fullrun_mos1_xmm0112450601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug  4 12:25:05 2012] Spatial fit model total counts = 743.001000, observed total counts = 779.000000
[Sat Aug  4 12:25:05 2012] Offset between fit and detection position for source 3 = 0.276841 pixels
[Sat Aug  4 12:25:05 2012] 750.455000 total counts/ 182.565000 bgd. counts: snr = 42.029620
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.276841 pixels
  Position = (235.7, 380.4) = 6 48 23.03 -44 11 47.2
  Extent = 6.9" x 5.7", rotation angle = 335
  Source counts = 567.9 +/- 27.4
  Background counts = 182.6
  Rate = 0.05 +/- 0.002
[Sat Aug  4 12:25:05 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 12:25:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 12:25:05 2012] Assessing source extent using major
[Sat Aug  4 12:25:05 2012] Source does appear to be extended
[Sat Aug  4 12:25:05 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Sat Aug  4 12:44:50 2012] XMMSAS src. selection expression = ellipse(20455.094437, 33048.768281, 413.602267, 342.172449, 334.594421, X, Y)
[Sat Aug  4 12:44:50 2012] Writing source region out to fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug  4 12:44:50 2012] Extracting stamp from image fullrun_mos1_xmm0112450601_pi300-10000_cl_sm2.00.img.gz, (212, 357) - (259, 404)
[Sat Aug  4 12:44:50 2012] XMMSAS bgd. selection expression = annulus(20455.094437, 33048.768281, 689.337112, 1378.674224, X, Y)
[Sat Aug  4 12:44:50 2012] Writing fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3.gif
[Sat Aug  4 12:44:52 2012] Mean detx,y = (-7078.30, 5600.04) 
[Sat Aug  4 12:44:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 12:45:03 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 12:45:03 2012] Setting source spectrum file to fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug  4 12:45:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug  4 13:27:10 2012] Updating aperture counts using extracted products
[Sat Aug  4 13:27:10 2012] Error reading totcts from fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug  4 13:27:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:27:10 2012] Using photon index=1.80, rate=0.0471, arf fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3.arf
[Sat Aug  4 13:27:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:27:10 2012] Updating source flux to 8e-13
[Sat Aug  4 13:27:49 2012] Reading fit data from xmm0112450601/analysis//spectral/fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_pl.csv
[Sat Aug  4 13:27:49 2012] Spectral fit parameter nH value = 4.79128e+21
[Sat Aug  4 13:27:49 2012] Spectral fit parameter PhoIndex value = 5.29956
[Sat Aug  4 13:27:49 2012] Failed to get F(0.3-8.0) from xmm0112450601/analysis//spectral/fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 13:27:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:27:49 2012] Using Nh = 4.8e+21, photon index=5.30, rate=0.0471, arf fullrun_mos1_xmm0112450601_pi300-10000_pass1_cl_src3.arf
[Sat Aug  4 13:27:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:27:49 2012] Updating source flux to 4.9e-13