[Sat Jun 15 08:21:46 2013] Detection parameters:
  Position = (226.5, 132.0) = 19 11 41.55 0 21 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.7 +/- 7.7
  Background counts = 3.4
  Rate = 0.003 +/- 0.0006

[Sat Jun 15 08:21:46 2013] Off-axis axis estimate = 13.14'
[Sat Jun 15 08:36:53 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:36:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 08:36:53 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Sat Jun 15 08:36:53 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007
[Sat Jun 15 08:36:53 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.00"
[Sat Jun 15 08:56:04 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 08:56:04 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 08:56:04 2013] Fit fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_src6 appears to have run properly
[Sat Jun 15 08:56:04 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 08:56:04 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 08:56:04 2013] Fit fullrun_mos2_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun 15 08:56:09 2013] Spatial fit model total counts = 72.016300, observed total counts = 68.000000
[Sat Jun 15 08:56:09 2013] Offset between fit and detection position for source 11 = 0.338641 pixels
[Sat Jun 15 08:56:09 2013] 75.530000 total counts/ 36.373800 bgd. counts: snr = 6.492414
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.338641 pixels
  Position = (226.5, 132.4) = 19 11 41.55 0 21 49.2
  Extent = 13.8 (10.2-20.4)" x 4.1 (3.3-6.2)", rotation angle = 42 (33-51) degrees
  Source counts = 39.2 +/- 8.7
  Background counts = 36.4
  Rate = 0.003 +/- 0.0006
[Sat Jun 15 08:56:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:56:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:56:09 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:56:09 2013] Source does appear to be extended
[Sat Jun 15 08:56:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Sat Jun 15 08:56:09 2013] Source is asymmetric
[Sat Jun 15 09:10:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:10:29 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sat Jun 15 09:10:29 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Sat Jun 15 09:10:29 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.95"
[Sat Jun 15 09:25:51 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 09:25:51 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:25:51 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 09:25:51 2013] fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:25:56 2013] Warning, spatial fit 6 centroid is now closest to src. 9
[Sat Jun 15 09:25:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:25:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:25:56 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:25:56 2013] Source does appear to be extended
[Sat Jun 15 09:25:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Sat Jun 15 09:25:56 2013] Source is asymmetric
[Sat Jun 15 09:34:03 2013] XMMSAS src. selection expression = ellipse(19656.869000, 11467.653800, 830.106024, 244.114807, 41.784907, X, Y)
[Sat Jun 15 09:34:03 2013] Writing source region out to fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 15 09:34:03 2013] Extracting stamp from image fullrun_mos2_xmm0112440401_pi300-10000_cl_sm2.00.img.gz, (179, 85) - (274, 180)
[Sat Jun 15 09:34:03 2013] XMMSAS bgd. selection expression = annulus(19656.869000, 11467.653800, 1383.510040, 2767.020080, X, Y)
[Sat Jun 15 09:34:03 2013] Writing fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11.gif
[Sat Jun 15 09:35:11 2013] Mean detx,y = (4869.51, -16896.09) 
[Sat Jun 15 09:35:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 09:35:30 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 09:35:31 2013] Setting source spectrum file to fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 15 09:35:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 15 09:40:24 2013] Not generating rmf since there are only 39 counts
[Sat Jun 15 09:40:24 2013] rmf not generated due to insufficient counts
[Sat Jun 15 09:41:20 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:41:20 2013] Total counts from fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 35.00
[Sat Jun 15 09:41:20 2013] Total counts from fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 154.00
[Sat Jun 15 09:41:20 2013] Got source and background scale factors 533488.000000, 7661250.000000
[Sat Jun 15 09:41:20 2013] User source parameters:
  Position = (226.5, 132.4) = 19 11 41.55 0 21 49.2
  Extent = 13.8 (10.2-20.4)" x 4.1 (3.3-6.2)", rotation angle = 42 (33-51) degrees
  Source aperture counts = 24.3 +/- 7.0
  Background aperture counts = 10.7
  Rate = 0.002 +/- 0.0005

[Sat Jun 15 09:41:21 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:41:21 2013] Using photon index=1.80, rate=0.00289, arf fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11.arf
[Sat Jun 15 09:41:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 09:41:21 2013] Updating source flux to 1.3e-13
[Sat Jun 15 09:41:23 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 09:41:24 2013] xmm0112440401/analysis//spectral/fullrun_mos2_xmm0112440401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete