[Sat Jun 15 08:21:29 2013] Detection parameters:
  Position = (504.0, 353.5) = 19 10 21.08 0 37 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.5 +/- 6.6
  Background counts = 3.6
  Rate = 0.002 +/- 0.0005

[Sat Jun 15 08:21:30 2013] Off-axis axis estimate = 15.42'
[Sat Jun 15 08:22:08 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:22:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 08:22:08 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Sat Jun 15 08:22:08 2013] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.977
[Sat Jun 15 08:22:08 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 14.14"
[Sat Jun 15 08:36:53 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 08:36:53 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 08:36:53 2013] Fit fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Jun 15 08:36:53 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 08:36:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 08:36:53 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 08:36:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 08:36:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112440401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:56:07 2013] Spatial fit model total counts = 58.047400, observed total counts = 53.000000
[Sat Jun 15 08:56:07 2013] Offset between fit and detection position for source 5 = 0.895850 pixels
[Sat Jun 15 08:56:07 2013] 58.372500 total counts/ 24.512700 bgd. counts: snr = 6.838940
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.895850 pixels
  Position = (503.5, 352.7) = 19 10 21.23 0 37 47.6
  Extent = 22.5 (10.8-28.3)" x 6.1 (3.5-10.8)", rotation angle = 85 (71-96) degrees
  Source counts = 33.9 +/- 7.6
  Background counts = 24.5
  Rate = 0.003 +/- 0.0006
[Sat Jun 15 08:56:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:56:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:56:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:56:07 2013] Source does appear to be extended
[Sat Jun 15 08:56:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sat Jun 15 08:56:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:56:13 2013] Initial guess for spatial extent in simple fitting = 14.29"
[Sat Jun 15 08:56:13 2013] source mask rpix=3.3, npix_max = 57, mask sum = 48, frac = 0.838
[Sat Jun 15 08:56:13 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.29"
[Sat Jun 15 09:10:29 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 09:10:29 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 09:10:29 2013] Fit fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun 15 09:10:29 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 09:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 09:10:29 2013] fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 09:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 09:10:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112440401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:25:54 2013] Spatial fit model total counts = 63.811100, observed total counts = 60.000000
[Sat Jun 15 09:25:54 2013] Offset between fit and detection position for source 5 = 1.165767 pixels
[Sat Jun 15 09:25:54 2013] 64.159200 total counts/ 29.115900 bgd. counts: snr = 6.494413
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.165767 pixels
  Position = (503.6, 351.5) = 19 10 21.20 0 37 42.6
  Extent = 28.6 (28.5-57.1)" x 5.7 (3.6-11.3)", rotation angle = 86 (77-93) degrees
  Source counts = 35.0 +/- 8.0
  Background counts = 29.1
  Rate = 0.003 +/- 0.0006
[Sat Jun 15 09:25:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:25:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:25:54 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:25:54 2013] Source does appear to be extended
[Sat Jun 15 09:25:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.53
[Sat Jun 15 09:25:54 2013] Source is asymmetric
[Sat Jun 15 09:26:00 2013] XMMSAS src. selection expression = ellipse(43761.008400, 30535.269600, 1714.422049, 344.377810, 85.677252, X, Y)
[Sat Jun 15 09:26:00 2013] Writing source region out to fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 15 09:26:00 2013] Extracting stamp from image fullrun_mos1_xmm0112440401_pi300-10000_cl_sm2.00.img.gz, (405, 253) - (595, 450)
[Sat Jun 15 09:26:00 2013] XMMSAS bgd. selection expression = annulus(43761.008400, 30535.269600, 2857.370082, 5714.740164, X, Y)
[Sat Jun 15 09:26:00 2013] Writing fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5.gif
[Sat Jun 15 09:27:51 2013] Mean detx,y = (6086.41, 15462.70) 
[Sat Jun 15 09:27:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 09:28:40 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 09:28:40 2013] Setting source spectrum file to fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 15 09:28:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 15 09:33:27 2013] Not generating rmf since there are only 35 counts
[Sat Jun 15 09:33:27 2013] rmf not generated due to insufficient counts
[Sat Jun 15 09:41:19 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:41:19 2013] Total counts from fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 46.00
[Sat Jun 15 09:41:19 2013] Total counts from fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 769.00
[Sat Jun 15 09:41:19 2013] Got source and background scale factors 1370685.000000, 31398022.000000
[Sat Jun 15 09:41:19 2013] User source parameters:
  Position = (503.6, 351.5) = 19 10 21.20 0 37 42.6
  Extent = 28.6 (28.5-57.1)" x 5.7 (3.6-11.3)", rotation angle = 86 (77-93) degrees
  Source aperture counts = 12.4 +/- 7.8
  Background aperture counts = 33.6
  Rate = 0.0009 +/- 0.0006

[Sat Jun 15 09:41:19 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:41:19 2013] Using photon index=1.80, rate=0.00259, arf fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5.arf
[Sat Jun 15 09:41:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 09:41:19 2013] Updating source flux to 8.1e-14
[Sat Jun 15 09:41:22 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 09:41:23 2013] xmm0112440401/analysis//spectral/fullrun_mos1_xmm0112440401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete