[Sat Jun 16 01:43:16 2012] Detection parameters:
  Position = (384.9, 419.9) = 19 10 55.62 0 42 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 8.8
  Background counts = 2.2
  Rate = 0.007 +/- 0.001

[Sat Jun 16 01:43:16 2012] Off-axis axis estimate = 10.81'
[Sat Jun 16 01:48:47 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 01:48:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 01:48:47 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Sat Jun 16 01:48:47 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Sat Jun 16 01:48:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.83"
[Sat Jun 16 01:57:33 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 16 01:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2.csv
[Sat Jun 16 01:57:33 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 16 01:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2.csv
[Sat Jun 16 01:57:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 01:57:33 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 16 01:57:33 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 16 01:57:33 2012] Fit fullrun_mos2_xmm0112440301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun 16 01:57:35 2012] Spatial fit model total counts = 81.999200, observed total counts = 81.000000
[Sat Jun 16 01:57:35 2012] Offset between fit and detection position for source 4 = 0.287705 pixels
[Sat Jun 16 01:57:35 2012] 83.652300 total counts/ 52.774100 bgd. counts: snr = 4.250515
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.287705 pixels
  Position = (384.6, 419.9) = 19 10 55.70 0 42 35.0
  Extent = 5.6 (4.2-7.5)", rotation angle = 0
  Source counts = 30.9 +/- 9.1
  Background counts = 52.8
  Rate = 0.004 +/- 0.001
[Sat Jun 16 01:57:35 2012] Spatial fit model total counts = 79.313700, observed total counts = 77.000000
[Sat Jun 16 01:57:35 2012] Offset between fit and detection position for source 4 = 0.272069 pixels
[Sat Jun 16 01:57:35 2012] Warning, changing simple spatial fit ID from 2 to 4
[Sat Jun 16 01:57:35 2012] 78.235300 total counts/ 45.057100 bgd. counts: snr = 4.942779
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.272069 pixels
  Position = (384.8, 419.9) = 19 10 55.62 0 42 34.8
  Extent = 5.8 (4.3-7.3)", rotation angle = 0
  Source counts = 33.2 +/- 8.8
  Background counts = 45.1
  Rate = 0.005 +/- 0.001
[Sat Jun 16 01:57:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 01:57:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 01:57:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 01:57:35 2012] Source does appear to be extended
[Sat Jun 16 01:57:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 02:02:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 02:02:56 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Sat Jun 16 02:02:56 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.189
[Sat Jun 16 02:02:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.80"
[Sat Jun 16 02:09:34 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 16 02:09:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 02:09:34 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 16 02:09:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 02:09:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 02:09:34 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 16 02:09:34 2012] fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 16 02:09:34 2012] Fit fullrun_mos2_xmm0112440301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 16 02:09:36 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Sat Jun 16 02:09:36 2012] Spatial fit model total counts = 77.692500, observed total counts = 77.000000
[Sat Jun 16 02:09:36 2012] Offset between fit and detection position for source 4 = 0.062330 pixels
[Sat Jun 16 02:09:36 2012] Warning, changing simple spatial fit ID from 2 to 4
[Sat Jun 16 02:09:36 2012] 76.706600 total counts/ 44.608000 bgd. counts: snr = 4.805955
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.062330 pixels
  Position = (384.8, 419.9) = 19 10 55.63 0 42 35.0
  Extent = 5.9 (4.3-7.3)", rotation angle = 0
  Source counts = 32.1 +/- 8.8
  Background counts = 44.6
  Rate = 0.004 +/- 0.001
[Sat Jun 16 02:09:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 02:09:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 02:09:36 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 02:09:36 2012] Source does appear to be extended
[Sat Jun 16 02:09:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 02:14:51 2012] XMMSAS src. selection expression = ellipse(33429.292000, 36485.566000, 351.663010, 351.663010, 0.000000, X, Y)
[Sat Jun 16 02:14:51 2012] Writing source region out to fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 16 02:14:51 2012] Extracting stamp from image fullrun_mos2_xmm0112440301_pi300-10000_cl_sm2.00.img.gz, (365, 400) - (405, 440)
[Sat Jun 16 02:14:51 2012] XMMSAS bgd. selection expression = annulus(33429.292000, 36485.566000, 586.105017, 1172.210034, X, Y) && !ellipse(34049.050934, 36240.525391, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 02:14:51 2012] Writing fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4.gif
[Sat Jun 16 02:15:04 2012] Mean detx,y = (-4576.60, 9990.62) 
[Sat Jun 16 02:15:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 02:15:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 02:15:09 2012] Setting source spectrum file to fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 02:15:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 16 02:15:34 2012] Not generating rmf since there are only 32 counts
[Sat Jun 16 02:15:34 2012] rmf not generated due to insufficient counts
[Sat Jun 16 02:15:56 2012] Updating aperture counts using extracted products
[Sat Jun 16 02:15:56 2012] Error reading totcts from fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 02:15:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 02:15:56 2012] Using photon index=1.80, rate=0.00448, arf fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4.arf
[Sat Jun 16 02:15:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 02:15:56 2012] Updating source flux to 1e-13
[Sat Jun 16 02:16:04 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 16 02:16:05 2012] xmm0112440301/analysis//spectral/fullrun_mos2_xmm0112440301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete