[Wed Jun 12 04:47:57 2013] Detection parameters:
  Position = (315.8, 315.1) = 19 11 16.07 0 35 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 366.6 +/- 22.9
  Background counts = 4.3
  Rate = 0.07 +/- 0.004

[Wed Jun 12 04:47:57 2013] Off-axis axis estimate = 1.74'
[Wed Jun 12 04:55:33 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 04:55:33 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jun 12 04:55:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Wed Jun 12 04:55:33 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Jun 12 04:59:10 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 04:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 04:59:10 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 04:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 04:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:59:10 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 04:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 12 04:59:10 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 04:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 12 04:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112440101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:59:12 2013] Source 1 is offset by -6.927136 and 5.784344 pixels which is larger than
2 X fitted extent = 0.839062 x 0.839062, not incorporating fit results
[Wed Jun 12 04:59:12 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 04:59:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 04:59:12 2013] Assessing source extent using major
[Wed Jun 12 04:59:12 2013] Source does appear to be extended
[Wed Jun 12 04:59:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 05:10:22 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 05:10:22 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jun 12 05:10:22 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Wed Jun 12 05:10:22 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Wed Jun 12 05:14:38 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 05:14:38 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 05:14:38 2013] Fit fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 12 05:14:38 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 05:14:38 2013] fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 05:14:38 2013] Fit fullrun_mos2_xmm0112440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 12 05:14:40 2013] Spatial fit model total counts = 314.137000, observed total counts = 308.000000
[Wed Jun 12 05:14:40 2013] Offset between fit and detection position for source 1 = 0.267545 pixels
[Wed Jun 12 05:14:40 2013] 314.638100 total counts/ 64.830100 bgd. counts: snr = 31.025443
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.267545 pixels
  Position = (315.5, 315.1) = 19 11 16.15 0 35 5.7
  Extent = 6.0 (5.2-6.9)" x 4.7 (4.2-5.3)", rotation angle = 356 (330-17) degrees
  Source counts = 249.8 +/- 17.7
  Background counts = 64.8
  Rate = 0.05 +/- 0.004
[Wed Jun 12 05:14:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 05:14:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 05:14:40 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 05:14:40 2013] Source does appear to be extended
[Wed Jun 12 05:14:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Wed Jun 12 05:20:19 2013] XMMSAS src. selection expression = ellipse(27401.556800, 27362.220200, 360.615010, 283.934408, 355.867646, X, Y)
[Wed Jun 12 05:20:19 2013] Writing source region out to fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 05:20:19 2013] Extracting stamp from image fullrun_mos2_xmm0112440101_pi300-10000_cl_sm2.00.img.gz, (295, 294) - (336, 336)
[Wed Jun 12 05:20:19 2013] XMMSAS bgd. selection expression = annulus(27401.556800, 27362.220200, 601.025017, 1202.050035, X, Y)
[Wed Jun 12 05:20:19 2013] Writing fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 05:20:20 2013] Mean detx,y = (87.52, 128.08) 
[Wed Jun 12 05:20:21 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 05:20:27 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 05:20:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 05:20:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 05:24:14 2013] Updating aperture counts using extracted products
[Wed Jun 12 05:24:14 2013] Total counts from fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 258.00
[Wed Jun 12 05:24:14 2013] Total counts from fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 52.00
[Wed Jun 12 05:24:14 2013] Got source and background scale factors 321600.000000, 3089784.000000
[Wed Jun 12 05:24:14 2013] User source parameters:
  Position = (315.5, 315.1) = 19 11 16.15 0 35 5.7
  Extent = 6.0 (5.2-6.9)" x 4.7 (4.2-5.3)", rotation angle = 356 (330-17) degrees
  Source aperture counts = 252.6 +/- 17.1
  Background aperture counts = 5.4
  Rate = 0.05 +/- 0.004

[Wed Jun 12 05:24:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 05:24:15 2013] Using photon index=1.80, rate=0.0522, arf fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 05:24:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 05:24:15 2013] Updating source flux to 7.8e-13
[Wed Jun 12 05:24:17 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Jun 12 05:24:18 2013] xmm0112440101/analysis//spectral/fullrun_mos2_xmm0112440101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete