[Mon Jun 17 12:58:11 2013] Detection parameters:
  Position = (276.4, 292.1) = 2 40 31.61 61 13 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5256.4 +/- 88.3
  Background counts = 6.6
  Rate = 1 +/- 0.02

[Mon Jun 17 12:58:11 2013] Off-axis axis estimate = 1.67'
[Mon Jun 17 13:04:37 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:04:37 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Jun 17 13:04:37 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.744
[Mon Jun 17 13:04:37 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Jun 17 13:10:31 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 17 13:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 13:10:31 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 17 13:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 13:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 13:10:31 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 17 13:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 13:10:31 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 17 13:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 13:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 13:10:38 2013] Spatial fit model total counts = 5626.690000, observed total counts = 4658.000000
[Mon Jun 17 13:10:38 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 13:10:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 13:10:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 13:10:38 2013] Assessing source extent using major
[Mon Jun 17 13:10:38 2013] Source does appear to be extended
[Mon Jun 17 13:10:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:16:43 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:16:43 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Jun 17 13:16:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.744
[Mon Jun 17 13:16:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Mon Jun 17 13:21:08 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 17 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 13:21:08 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 17 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 13:21:08 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 17 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 13:21:08 2013] fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 17 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 13:21:10 2013] Spatial fit model total counts = 5626.600000, observed total counts = 4658.000000
[Mon Jun 17 13:21:10 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 13:21:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 13:21:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 13:21:10 2013] Assessing source extent using major
[Mon Jun 17 13:21:10 2013] Source does appear to be extended
[Mon Jun 17 13:21:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:37:04 2013] Counts = 5256.362305, rescaling region sizes by 2.000000
[Mon Jun 17 13:37:04 2013] XMMSAS src. selection expression = ellipse(23995.416107, 25361.702148, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 13:37:04 2013] Writing source region out to fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 17 13:37:04 2013] Extracting stamp from image fullrun_mos2_xmm0112430401_pi300-10000_cl_sm2.00.img.gz, (201, 217) - (351, 367)
[Mon Jun 17 13:37:04 2013] XMMSAS bgd. selection expression = annulus(23995.416107, 25361.702148, 4350.000000, 8700.000000, X, Y) && !ellipse(28234.025100, 18075.964800, 564.753616, 469.393614, 351.734908, X, Y) && !ellipse(22101.893800, 29087.112800, 497.016014, 330.645610, 14.870752, X, Y)
[Mon Jun 17 13:37:04 2013] Writing fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1.gif
[Mon Jun 17 13:37:06 2013] Mean detx,y = (146.47, 95.61) 
[Mon Jun 17 13:37:07 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 13:40:21 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 13:40:22 2013] Setting source spectrum file to fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 17 13:40:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 17 13:41:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 13:41:32 2013] rmf not generated due to insufficient counts
[Mon Jun 17 13:45:24 2013] Updating aperture counts using extracted products
[Mon Jun 17 13:45:24 2013] Total counts from fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 5091.00
[Mon Jun 17 13:45:24 2013] Total counts from fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3182.00
[Mon Jun 17 13:45:24 2013] Got source and background scale factors 4836796.000000, 163008389.000000
[Mon Jun 17 13:45:24 2013] User source parameters:
  Position = (276.4, 292.1) = 2 40 31.61 61 13 46.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4996.6 +/- 72.4
  Background aperture counts = 94.4
  Rate = 0.8 +/- 0.01

[Mon Jun 17 13:45:24 2013] Updating counts from extracted products
[Mon Jun 17 13:45:24 2013] Set source signif. to 4996.58/9.72 = 514.22
[Mon Jun 17 13:45:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 13:45:25 2013] Using photon index=1.80, rate=0.812, arf fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1.arf
[Mon Jun 17 13:45:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 13:45:25 2013] Updating source flux to 1.2e-11
[Mon Jun 17 13:45:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 13:45:28 2013] xmm0112430401/analysis//spectral/fullrun_mos2_xmm0112430401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete