[Thu Jul 12 23:44:33 2012] Detection parameters:
  Position = (367.3, 227.6) = 2 40 2.41 61 7 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.4 +/- 6.1
  Background counts = 1.8
  Rate = 0.5 +/- 0.1

[Thu Jul 12 23:44:33 2012] Off-axis axis estimate = 7.16'
[Thu Jul 12 23:50:23 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 23:50:23 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Thu Jul 12 23:50:23 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.701
[Thu Jul 12 23:50:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.01"
[Thu Jul 12 23:53:02 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 12 23:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2.csv
[Thu Jul 12 23:53:02 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 12 23:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2.csv
[Thu Jul 12 23:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:53:02 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 12 23:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 12 23:53:02 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 12 23:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 12 23:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430103_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:53:04 2012] Spatial fit model total counts = 43.137600, observed total counts = 39.000000
[Thu Jul 12 23:53:04 2012] Offset between fit and detection position for source 2 = 0.354544 pixels
[Thu Jul 12 23:53:04 2012] 41.875700 total counts/ 24.014500 bgd. counts: snr = 3.644801
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.354544 pixels
  Position = (367.4, 227.9) = 2 40 2.36 61 7 42.7
  Extent = 3.6 (2.5-6.0)" x 2.5 (1.9-2.5)", rotation angle = 112 (66-157) degrees
  Source counts = 17.9 +/- 6.5
  Background counts = 24.0
  Rate = 0.2 +/- 0.08
[Thu Jul 12 23:53:04 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 23:53:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 23:53:04 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 23:53:04 2012] Source does appear to be extended
[Thu Jul 12 23:53:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Thu Jul 12 23:57:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:57:12 2012] Initial guess for spatial extent in simple fitting = 3.04"
[Thu Jul 12 23:57:12 2012] source mask rpix=0.7, npix_max = 5, mask sum = 5, frac = 0.868
[Thu Jul 12 23:57:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.04"
[Fri Jul 13 00:01:08 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 00:01:08 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 00:01:08 2012] Fit fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jul 13 00:01:08 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 00:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 13 00:01:08 2012] fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 00:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 13 00:01:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112430103_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 00:01:10 2012] Spatial fit model total counts = 37.639100, observed total counts = 40.000000
[Fri Jul 13 00:01:10 2012] Offset between fit and detection position for source 2 = 0.326400 pixels
[Fri Jul 13 00:01:10 2012] 36.515800 total counts/ 25.155400 bgd. counts: snr = 2.265051
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.326400 pixels
  Position = (367.6, 227.6) = 2 40 2.26 61 7 41.5
  Extent = 3.5 (2.6-6.1)", rotation angle = 116 (108-125) degrees
  Source counts = 11.4 +/- 6.0
  Background counts = 25.2
  Rate = 0.1 +/- 0.07
[Fri Jul 13 00:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 00:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 00:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 00:01:10 2012] Source does appear to be extended
[Fri Jul 13 00:01:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.14
[Fri Jul 13 00:01:10 2012] Source is asymmetric
[Fri Jul 13 00:08:59 2012] XMMSAS src. selection expression = ellipse(31929.088600, 19755.709000, 212.970006, 45.660421, 115.621869, X, Y)
[Fri Jul 13 00:08:59 2012] Writing source region out to fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 00:08:59 2012] Extracting stamp from image fullrun_mos2_xmm0112430103_pi300-10000_cl_sm2.00.img.gz, (355, 215) - (380, 240)
[Fri Jul 13 00:08:59 2012] XMMSAS bgd. selection expression = annulus(31929.088600, 19755.709000, 354.950010, 709.900020, X, Y)
[Fri Jul 13 00:08:59 2012] Writing fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 00:09:09 2012] Mean detx,y = (-6745.50, -4884.00) 
[Fri Jul 13 00:09:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 00:09:21 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 00:09:21 2012] Setting source spectrum file to fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 00:09:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 13 00:09:25 2012] Not generating rmf since there are only 11 counts
[Fri Jul 13 00:09:25 2012] rmf not generated due to insufficient counts
[Fri Jul 13 00:09:34 2012] Updating aperture counts using extracted products
[Fri Jul 13 00:09:34 2012] Error reading totcts from fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 00:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 00:09:34 2012] Using photon index=1.80, rate=0.132, arf fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 00:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 00:09:34 2012] Updating source flux to 2.1e-11
[Fri Jul 13 00:09:43 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 13 00:09:44 2012] xmm0112430103/analysis//spectral/fullrun_mos2_xmm0112430103_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete