[Mon May 21 22:38:49 2012] Detection parameters:
  Position = (254.1, 256.2) = 8 42 18.55 -53 1 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3942.5 +/- 75.8
  Background counts = 136.9
  Rate = 0.1 +/- 0.002

[Mon May 21 22:38:51 2012] Off-axis axis estimate = 4.44'
[Mon May 21 22:44:45 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Mon May 21 22:44:45 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Mon May 21 22:44:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Mon May 21 22:44:45 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.65"
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8.ximg exists
[Tue May 22 00:48:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8.csv
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May 22 00:48:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8.csv
[Tue May 22 00:48:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 00:48:56 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May 22 00:48:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 22 00:48:56 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May 22 00:48:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 22 00:48:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 03:15:26 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.714999 pixels away
[Tue May 22 03:15:26 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:15:26 2012] Assessing source extent using major
[Tue May 22 03:15:26 2012] Source does appear to be extended
[Tue May 22 03:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 03:16:03 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Tue May 22 03:16:03 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Tue May 22 03:16:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Tue May 22 03:16:03 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.65"
[Tue May 22 04:48:14 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8.ximg exists
[Tue May 22 04:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8.csv
[Tue May 22 04:48:14 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue May 22 04:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8.csv
[Tue May 22 04:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 04:48:15 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue May 22 04:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Tue May 22 04:48:15 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue May 22 04:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Tue May 22 04:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:01:30 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.610484 pixels away
[Tue May 22 07:01:31 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:01:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:01:31 2012] Assessing source extent using major
[Tue May 22 07:01:31 2012] Source does appear to be extended
[Tue May 22 07:01:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 07:02:06 2012] Counts = 3942.530273, rescaling region sizes by 2.000000
[Tue May 22 07:02:06 2012] XMMSAS src. selection expression = ellipse(22061.245850, 22243.046326, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 07:02:06 2012] Writing source region out to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9_src.reg
[Tue May 22 07:02:06 2012] Extracting stamp from image fullrun_pn_xmm0112420101_pi300-10000_cl_sm2.00.img.gz, (179, 181) - (329, 331)
[Tue May 22 07:02:06 2012] XMMSAS bgd. selection expression = annulus(22061.245850, 22243.046326, 4350.000000, 8700.000000, X, Y) && !ellipse(29094.847439, 25013.554200, 419.204012, 419.204012, 0.000000, X, Y) && !ellipse(17002.840225, 23358.105530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23191.011420, 17326.490600, 491.692814, 438.748013, 5.931340, X, Y) && !ellipse(22736.804720, 29352.560200, 478.094414, 419.425612, 348.546332, X, Y) && !ellipse(29165.343000, 13327.992400, 491.014414, 491.014414, 0.000000, X, Y) && !ellipse(19873.800400, 27489.700165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13962.834335, 18979.109955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18689.128983, 27750.131989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.000000, 22479.646606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14825.610001, 17509.794174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21980.552872, 17377.606903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.861664, 30214.471771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27148.845600, 27747.299800, 426.571212, 359.080010, 59.444000, X, Y) && !ellipse(18282.326721, 17843.268509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15300.012800, 30170.008600, 370.990411, 370.990411, 0.000000, X, Y) && !ellipse(31552.988861, 27783.850861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24103.901600, 27149.105400, 486.039214, 486.039214, 0.000000, X, Y) && !ellipse(26476.718872, 26997.932983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.272380, 26431.423400, 416.230412, 416.230412, 0.000000, X, Y) && !ellipse(28140.652283, 26022.507080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.022888, 24710.264160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.557200, 22458.051600, 465.649613, 465.649613, 0.000000, X, Y) && !ellipse(16673.677360, 20589.872800, 369.620811, 369.620811, 0.000000, X, Y) && !ellipse(21429.995377, 19389.629257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.172800, 16288.981200, 380.756011, 380.756011, 0.000000, X, Y) && !ellipse(23362.280900, 14989.998180, 470.544014, 470.544014, 0.000000, X, Y)
[Tue May 22 07:02:06 2012] Writing fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9.gif
[Tue May 22 07:20:41 2012] Mean detx,y = (4011.56, -229.85) 
[Tue May 22 07:20:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 07:23:10 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 07:23:11 2012] Setting source spectrum file to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 22 07:23:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 22 08:16:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 08:16:52 2012] rmf not generated due to insufficient counts
[Tue May 22 11:06:47 2012] Updating aperture counts using extracted products
[Tue May 22 11:06:47 2012] Error reading totcts from fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 22 11:06:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:06:52 2012] Using photon index=1.80, rate=0.125, arf fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src9.arf
[Tue May 22 11:06:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:06:52 2012] Updating source flux to 3.7e-13
[Tue May 22 11:14:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting