[Mon May 21 22:38:48 2012] Detection parameters:
  Position = (335.1, 288.7) = 8 41 39.52 -52 59 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4024.2 +/- 76.0
  Background counts = 137.1
  Rate = 0.1 +/- 0.002

[Mon May 21 22:38:51 2012] Off-axis axis estimate = 2.75'
[Mon May 21 22:44:45 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon May 21 22:44:45 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Mon May 21 22:44:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.618
[Mon May 21 22:44:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.80"
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 22 00:48:55 2012] Fit fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 22 00:48:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 22 00:48:55 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 22 00:48:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 22 00:48:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 03:15:26 2012] Spatial fit model total counts = 3960.770000, observed total counts = 4104.000000
[Tue May 22 03:15:26 2012] Offset between fit and detection position for source 1 = 0.647421 pixels
[Tue May 22 03:15:26 2012] 3929.860000 total counts/ 1594.400000 bgd. counts: snr = 58.488945
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.647421 pixels
  Position = (335.0, 288.1) = 8 41 39.58 -52 59 39.5
  Extent = 5.2" x 5.2", rotation angle = 0
  Source counts = 2335.5 +/- 62.7
  Background counts = 1594.4
  Rate = 0.06 +/- 0.002
[Tue May 22 03:15:26 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:15:26 2012] Assessing source extent using major
[Tue May 22 03:15:26 2012] Source does appear to be extended
[Tue May 22 03:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 03:16:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 03:16:03 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Tue May 22 03:16:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 11, frac = 0.946
[Tue May 22 03:16:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Tue May 22 04:48:14 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 04:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 04:48:14 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 04:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 04:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 04:48:15 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 04:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 22 04:48:15 2012] fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 04:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 22 04:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:01:30 2012] Warning, spatial fit 1 centroid is now closest to src. 47
[Tue May 22 07:01:31 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:01:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:01:31 2012] Assessing source extent using major
[Tue May 22 07:01:31 2012] Source does appear to be extended
[Tue May 22 07:01:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 07:02:05 2012] Counts = 2335.460000, rescaling region sizes by 2.000000
[Tue May 22 07:02:05 2012] XMMSAS src. selection expression = ellipse(29094.847439, 25013.554200, 628.806018, 628.806018, 0.000000, X, Y)
[Tue May 22 07:02:05 2012] Writing source region out to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 22 07:02:05 2012] Extracting stamp from image fullrun_pn_xmm0112420101_pi300-10000_cl_sm2.00.img.gz, (299, 252) - (371, 324)
[Tue May 22 07:02:05 2012] XMMSAS bgd. selection expression = annulus(29094.847439, 25013.554200, 2096.020060, 4192.040121, X, Y) && !ellipse(27148.845600, 27747.299800, 426.571212, 359.080010, 59.444000, X, Y) && !ellipse(31552.988861, 27783.850861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.069200, 27286.090000, 434.005612, 434.005612, 0.000000, X, Y) && !ellipse(26476.718872, 26997.932983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.272380, 26431.423400, 416.230412, 416.230412, 0.000000, X, Y) && !ellipse(28140.652283, 26022.507080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.022888, 24710.264160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.557200, 22458.051600, 465.649613, 465.649613, 0.000000, X, Y)
[Tue May 22 07:02:05 2012] Writing fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1.gif
[Tue May 22 07:02:40 2012] Mean detx,y = (-3552.70, -561.55) 
[Tue May 22 07:02:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 07:03:49 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 07:03:49 2012] Setting source spectrum file to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 07:03:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 22 11:06:47 2012] Updating aperture counts using extracted products
[Tue May 22 11:06:47 2012] Error reading totcts from fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 11:06:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:06:51 2012] Using photon index=1.80, rate=0.0636, arf fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 11:06:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:06:51 2012] Updating source flux to 2.9e-13
[Tue May 22 11:18:42 2012] Reading fit data from xmm0112420101/analysis//spectral/fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 22 11:18:42 2012] Spectral fit parameter nH value = 2.78943e+21
[Tue May 22 11:18:42 2012] Spectral fit parameter PhoIndex value = 3.99572
[Tue May 22 11:18:42 2012] Failed to get F(0.3-8.0) from xmm0112420101/analysis//spectral/fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 22 11:18:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:18:42 2012] Using Nh = 2.8e+21, photon index=4.00, rate=0.0636, arf fullrun_pn_xmm0112420101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 11:18:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:18:42 2012] Updating source flux to 1.9e-13