[Mon May 21 22:40:24 2012] Detection parameters:
  Position = (266.9, 199.9) = 8 42 12.44 -53 6 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2261.0 +/- 57.8
  Background counts = 21.0
  Rate = 0.07 +/- 0.002

[Mon May 21 22:40:25 2012] Off-axis axis estimate = 7.50'
[Tue May 22 02:19:59 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue May 22 02:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 02:19:59 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Tue May 22 02:19:59 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Tue May 22 02:19:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.18"
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 22 03:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2.csv
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 22 03:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2.csv
[Tue May 22 03:15:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 22 03:15:15 2012] Fit fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May 22 03:15:41 2012] Warning, spatial fit 2 centroid is now closest to src. 12
[Tue May 22 03:15:41 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.470082 pixels away
[Tue May 22 03:15:41 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:15:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:15:41 2012] Assessing source extent using major
[Tue May 22 03:15:41 2012] Source does appear to be extended
[Tue May 22 03:15:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 06:03:10 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:03:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 06:03:10 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Tue May 22 06:03:10 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Tue May 22 06:03:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.18"
[Tue May 22 07:01:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 22 07:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2.csv
[Tue May 22 07:01:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 22 07:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2.csv
[Tue May 22 07:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:01:16 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 22 07:01:16 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 22 07:01:16 2012] Fit fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue May 22 07:01:47 2012] Spatial fit model total counts = 2225.940000, observed total counts = 2227.000000
[Tue May 22 07:01:47 2012] Offset between fit and detection position for source 4 = 0.085534 pixels
[Tue May 22 07:01:47 2012] 2250.155000 total counts/ 712.625000 bgd. counts: snr = 57.596099
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.085534 pixels
  Position = (266.9, 199.8) = 8 42 12.41 -53 6 3.3
  Extent = 5.2 (4.9-5.4)", rotation angle = 0
  Source counts = 1537.5 +/- 47.4
  Background counts = 712.6
  Rate = 0.03 +/- 0.001
[Tue May 22 07:01:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:01:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:01:47 2012] Assessing source extent using major axis lower bound
[Tue May 22 07:01:47 2012] Source does appear to be extended
[Tue May 22 07:01:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 09:58:25 2012] Counts = 1537.530000, rescaling region sizes by 2.000000
[Tue May 22 09:58:25 2012] XMMSAS src. selection expression = ellipse(23173.662000, 17337.535780, 618.309618, 618.309618, 0.000000, X, Y)
[Tue May 22 09:58:25 2012] Writing source region out to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_src.reg
[Tue May 22 09:58:25 2012] Extracting stamp from image fullrun_mos2_xmm0112420101_pi300-10000_cl_sm2.00.img.gz, (231, 164) - (302, 235)
[Tue May 22 09:58:25 2012] XMMSAS bgd. selection expression = annulus(23173.662000, 17337.535780, 2061.032059, 4122.064119, X, Y) && !ellipse(21968.445940, 17395.502600, 435.718413, 435.718413, 0.000000, X, Y) && !ellipse(23377.104919, 14933.077621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21424.035040, 19375.305200, 305.412809, 305.412809, 0.000000, X, Y)
[Tue May 22 09:58:25 2012] Writing fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4.gif
[Tue May 22 10:01:16 2012] Mean detx,y = (-4765.28, 5121.13) 
[Tue May 22 10:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 10:02:24 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 10:02:24 2012] Setting source spectrum file to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 22 10:02:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 22 11:06:59 2012] Updating aperture counts using extracted products
[Tue May 22 11:06:59 2012] Error reading totcts from fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 22 11:07:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:07:02 2012] Using photon index=1.80, rate=0.0349, arf fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4.arf
[Tue May 22 11:07:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:07:02 2012] Updating source flux to 6.1e-13
[Tue May 22 11:14:05 2012] Reading fit data from xmm0112420101/analysis//spectral/fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_pl.csv
[Tue May 22 11:14:05 2012] Spectral fit parameter nH value = 1.0287e+22
[Tue May 22 11:14:05 2012] Spectral fit parameter PhoIndex value = 8.90712
[Tue May 22 11:14:05 2012] Failed to get F(0.3-8.0) from xmm0112420101/analysis//spectral/fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue May 22 11:14:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:14:05 2012] Using Nh = 1e+22, photon index=8.91, rate=0.0349, arf fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src4.arf
[Tue May 22 11:14:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:14:05 2012] Updating source flux to 3.5e-13