[Mon May 21 22:40:24 2012] Detection parameters:
  Position = (195.9, 269.0) = 8 42 46.59 -53 1 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1069.5 +/- 40.4
  Background counts = 19.5
  Rate = 0.03 +/- 0.001

[Mon May 21 22:40:25 2012] Off-axis axis estimate = 7.73'
[Tue May 22 02:19:59 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue May 22 02:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 02:19:59 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Tue May 22 02:19:59 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Tue May 22 02:19:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.29"
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 22 03:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5.csv
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 22 03:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5.csv
[Tue May 22 03:15:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 22 03:15:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 22 03:15:15 2012] Fit fullrun_mos2_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 22 03:15:41 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.724690 pixels away
[Tue May 22 03:15:41 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:15:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:15:41 2012] Assessing source extent using major
[Tue May 22 03:15:41 2012] Source does appear to be extended
[Tue May 22 03:15:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 06:03:10 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:03:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 06:03:10 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Tue May 22 06:03:10 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Tue May 22 06:03:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.29"
[Tue May 22 07:01:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 22 07:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5.csv
[Tue May 22 07:01:15 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 22 07:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5.csv
[Tue May 22 07:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:01:16 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 22 07:01:16 2012] fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 22 07:01:16 2012] Fit fullrun_mos2_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 22 07:01:47 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.162464 pixels away
[Tue May 22 07:01:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:01:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:01:47 2012] Assessing source extent using major
[Tue May 22 07:01:47 2012] Source does appear to be extended
[Tue May 22 07:01:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 09:58:25 2012] Counts = 1069.453979, rescaling region sizes by 2.000000
[Tue May 22 09:58:25 2012] XMMSAS src. selection expression = ellipse(16998.937332, 23352.675995, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 09:58:25 2012] Writing source region out to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2_src.reg
[Tue May 22 09:58:25 2012] Extracting stamp from image fullrun_mos2_xmm0112420101_pi300-10000_cl_sm2.00.img.gz, (121, 194) - (271, 344)
[Tue May 22 09:58:25 2012] XMMSAS bgd. selection expression = annulus(16998.937332, 23352.675995, 4350.000000, 8700.000000, X, Y) && !ellipse(22754.638611, 29364.570343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23173.662000, 17337.535780, 412.206412, 412.206412, 0.000000, X, Y) && !ellipse(22047.005420, 22281.172400, 537.720015, 537.720015, 0.000000, X, Y) && !ellipse(19867.100760, 27510.672400, 398.955211, 398.955211, 0.000000, X, Y) && !ellipse(13948.781265, 18940.318649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21968.445940, 17395.502600, 435.718413, 435.718413, 0.000000, X, Y) && !ellipse(18668.794113, 27706.594818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24485.529205, 31898.787842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15286.570877, 30160.938416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9579.543587, 27616.196381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21101.942612, 22484.616821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14804.791480, 17500.351200, 299.356009, 299.356009, 0.000000, X, Y) && !ellipse(17262.141006, 30342.032654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23377.104919, 14933.077621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25419.002600, 24733.612800, 211.745606, 211.745606, 0.000000, X, Y) && !ellipse(21424.035040, 19375.305200, 305.412809, 305.412809, 0.000000, X, Y)
[Tue May 22 09:58:25 2012] Writing fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2.gif
[Tue May 22 10:04:16 2012] Mean detx,y = (-7993.01, -2858.19) 
[Tue May 22 10:04:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 10:06:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 10:06:24 2012] Setting source spectrum file to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 10:06:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 22 10:41:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 10:41:44 2012] rmf not generated due to insufficient counts
[Tue May 22 11:07:00 2012] Updating aperture counts using extracted products
[Tue May 22 11:07:00 2012] Error reading totcts from fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 11:07:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:07:02 2012] Using photon index=1.80, rate=0.0343, arf fullrun_mos2_xmm0112420101_pi300-10000_pass1_cl_src2.arf
[Tue May 22 11:07:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:07:02 2012] Updating source flux to 5.4e-13
[Tue May 22 11:11:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting