[Mon May 21 22:39:30 2012] Detection parameters:
  Position = (262.1, 338.2) = 8 42 14.68 -52 56 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2364.0 +/- 57.8
  Background counts = 19.6
  Rate = 0.07 +/- 0.002

[Mon May 21 22:39:33 2012] Off-axis axis estimate = 3.91'
[Tue May 22 00:48:56 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Tue May 22 00:48:56 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Tue May 22 00:48:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.891
[Tue May 22 00:48:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.38"
[Tue May 22 02:19:58 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 22 02:19:58 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 22 02:19:58 2012] Fit fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue May 22 02:19:59 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 22 02:19:59 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 22 02:19:59 2012] Fit fullrun_mos1_xmm0112420101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 22 03:15:34 2012] Spatial fit model total counts = 2297.640000, observed total counts = 2244.000000
[Tue May 22 03:15:34 2012] Offset between fit and detection position for source 6 = 0.347261 pixels
[Tue May 22 03:15:34 2012] 2287.749000 total counts/ 595.939000 bgd. counts: snr = 69.302784
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.347261 pixels
  Position = (261.9, 337.9) = 8 42 14.78 -52 56 2.5
  Extent = 5.4" x 4.4", rotation angle = 341
  Source counts = 1691.8 +/- 47.8
  Background counts = 595.9
  Rate = 0.04 +/- 0.001
[Tue May 22 03:15:34 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:15:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:15:34 2012] Assessing source extent using major
[Tue May 22 03:15:34 2012] Source does appear to be extended
[Tue May 22 03:15:34 2012] Computing asymmetry using major and minor axis, asym = 1.23
[Tue May 22 04:48:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 04:48:15 2012] Initial guess for spatial extent in simple fitting = 4.86"
[Tue May 22 04:48:15 2012] source mask rpix=1.1, npix_max = 10, mask sum = 10, frac = 0.956
[Tue May 22 04:48:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.86"
[Tue May 22 06:03:09 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 06:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 06:03:09 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 06:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 06:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 06:03:10 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 06:03:10 2012] fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 06:03:10 2012] Fit fullrun_mos1_xmm0112420101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 22 07:01:38 2012] Spatial fit model total counts = 2331.250000, observed total counts = 2244.000000
[Tue May 22 07:01:38 2012] Offset between fit and detection position for source 6 = 0.025031 pixels
[Tue May 22 07:01:38 2012] 2320.955000 total counts/ 599.775000 bgd. counts: snr = 70.280058
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.025031 pixels
  Position = (261.9, 337.9) = 8 42 14.78 -52 56 2.6
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 1721.2 +/- 48.2
  Background counts = 599.8
  Rate = 0.04 +/- 0.001
[Tue May 22 07:01:38 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:01:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:01:38 2012] Assessing source extent using major axis lower bound
[Tue May 22 07:01:38 2012] Source does appear to be extended
[Tue May 22 07:01:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 08:44:28 2012] Counts = 1721.180000, rescaling region sizes by 2.000000
[Tue May 22 08:44:28 2012] XMMSAS src. selection expression = ellipse(22734.662960, 29351.015600, 583.274417, 583.274417, 0.000000, X, Y)
[Tue May 22 08:44:28 2012] Writing source region out to fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_src.reg
[Tue May 22 08:44:28 2012] Extracting stamp from image fullrun_mos1_xmm0112420101_pi300-10000_cl_sm2.00.img.gz, (228, 304) - (295, 371)
[Tue May 22 08:44:28 2012] XMMSAS bgd. selection expression = annulus(22734.662960, 29351.015600, 1944.248056, 3888.496112, X, Y) && !ellipse(19858.467606, 27421.484497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26556.265707, 27126.238934, 411.481762, 360.920201, 35.919202, X, Y) && !ellipse(18651.689020, 27697.435600, 411.697612, 411.697612, 0.000000, X, Y) && !ellipse(24509.567200, 31956.261400, 552.214416, 552.214416, 0.000000, X, Y)
[Tue May 22 08:44:28 2012] Writing fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6.gif
[Tue May 22 08:44:33 2012] Mean detx,y = (-5847.14, 145.41) 
[Tue May 22 08:44:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 08:45:17 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 08:45:17 2012] Setting source spectrum file to fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 08:45:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May 22 11:06:54 2012] Updating aperture counts using extracted products
[Tue May 22 11:06:55 2012] Error reading totcts from fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 11:06:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:06:57 2012] Using photon index=1.80, rate=0.0391, arf fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6.arf
[Tue May 22 11:06:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:06:57 2012] Updating source flux to 6.4e-13
[Tue May 22 11:11:45 2012] Reading fit data from xmm0112420101/analysis//spectral/fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_pl.csv
[Tue May 22 11:11:45 2012] Spectral fit parameter nH value = 4.03259e+21
[Tue May 22 11:11:45 2012] Spectral fit parameter PhoIndex value = 4.84924
[Tue May 22 11:11:45 2012] Failed to get F(0.3-8.0) from xmm0112420101/analysis//spectral/fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Tue May 22 11:11:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 11:11:45 2012] Using Nh = 4e+21, photon index=4.85, rate=0.0391, arf fullrun_mos1_xmm0112420101_pi300-10000_pass1_cl_src6.arf
[Tue May 22 11:11:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 11:11:45 2012] Updating source flux to 4e-13