[Sun Jul 15 05:22:20 2012] Detection parameters:
  Position = (304.0, 305.9) = 17 19 38.62 -25 2 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 704.7 +/- 34.0
  Background counts = 11.9
  Rate = 0.07 +/- 0.003

[Sun Jul 15 05:22:21 2012] Off-axis axis estimate = 0.68'
[Sun Jul 15 05:47:33 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 05:47:33 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jul 15 05:47:33 2012] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.710
[Sun Jul 15 05:47:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.77"
[Sun Jul 15 05:55:28 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 05:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 05:55:28 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 05:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 05:55:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 05:55:28 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 05:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 15 05:55:28 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 05:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 15 05:55:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112410101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 05:55:34 2012] Source 1 is offset by 6.184883 and 5.164833 pixels which is larger than
2 X fitted extent = 0.777752 x 0.777752, not incorporating fit results
[Sun Jul 15 05:55:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 05:55:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 05:55:34 2012] Assessing source extent using major
[Sun Jul 15 05:55:34 2012] Source does appear to be extended
[Sun Jul 15 05:55:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 06:18:05 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 06:18:05 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jul 15 06:18:05 2012] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.710
[Sun Jul 15 06:18:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.77"
[Sun Jul 15 06:27:53 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 06:27:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 06:27:53 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 06:27:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 06:27:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 06:27:53 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 06:27:53 2012] fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 06:27:53 2012] Fit fullrun_mos2_xmm0112410101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 06:27:57 2012] Spatial fit model total counts = 600.666000, observed total counts = 604.000000
[Sun Jul 15 06:27:57 2012] Offset between fit and detection position for source 1 = 0.284724 pixels
[Sun Jul 15 06:27:57 2012] 596.529000 total counts/ 214.868000 bgd. counts: snr = 26.037058
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.284724 pixels
  Position = (303.8, 305.7) = 17 19 38.67 -25 1 59.7
  Extent = 5.2 (4.6-6.0)", rotation angle = 0
  Source counts = 381.7 +/- 24.4
  Background counts = 214.9
  Rate = 0.03 +/- 0.002
[Sun Jul 15 06:27:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 06:27:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 06:27:57 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 06:27:57 2012] Source does appear to be extended
[Sun Jul 15 06:27:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 06:50:51 2012] XMMSAS src. selection expression = ellipse(26383.327800, 26547.402600, 312.111009, 312.111009, 0.000000, X, Y)
[Sun Jul 15 06:50:51 2012] Writing source region out to fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 06:50:51 2012] Extracting stamp from image fullrun_mos2_xmm0112410101_pi300-10000_cl_sm2.00.img.gz, (286, 288) - (322, 324)
[Sun Jul 15 06:50:51 2012] XMMSAS bgd. selection expression = annulus(26383.327800, 26547.402600, 520.185015, 1040.370030, X, Y)
[Sun Jul 15 06:50:51 2012] Writing fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 06:50:53 2012] Mean detx,y = (678.49, -1039.88) 
[Sun Jul 15 06:50:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 06:51:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 06:51:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 06:51:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 07:03:13 2012] Updating aperture counts using extracted products
[Sun Jul 15 07:03:13 2012] Error reading totcts from fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 07:03:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 07:03:13 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 07:03:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 07:03:13 2012] Updating source flux to 4.5e-13
[Sun Jul 15 07:03:41 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Jul 15 07:04:07 2012] Reading fit data from xmm0112410101/analysis//spectral/fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 15 07:04:07 2012] Spectral fit parameter nH value = 1.02683e+22
[Sun Jul 15 07:04:07 2012] Spectral fit parameter PhoIndex value = 9.08368
[Sun Jul 15 07:04:07 2012] Failed to get F(0.3-8.0) from xmm0112410101/analysis//spectral/fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 07:04:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 07:04:07 2012] Using Nh = 1e+22, photon index=9.08, rate=0.0339, arf fullrun_mos2_xmm0112410101_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 07:04:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 07:04:07 2012] Updating source flux to 2.6e-13