[Mon Jun 10 11:51:45 2013] Detection parameters:
  Position = (457.7, 226.9) = 5 35 30.46 -1 18 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.7 +/- 7.2
  Background counts = 2.6
  Rate = 0.003 +/- 0.0006

[Mon Jun 10 11:51:45 2013] Off-axis axis estimate = 12.66'
[Mon Jun 10 13:02:53 2013] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 13:02:53 2013] Initial guess for spatial extent in simple fitting = 12.76"
[Mon Jun 10 13:02:53 2013] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.849
[Mon Jun 10 13:02:53 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.76"
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16.csv
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16.csv
[Mon Jun 10 13:35:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jun 10 13:35:21 2013] Fit fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jun 10 13:35:35 2013] Spatial fit model total counts = 45.986400, observed total counts = 46.000000
[Mon Jun 10 13:35:35 2013] Offset between fit and detection position for source 20 = 0.528111 pixels
[Mon Jun 10 13:35:35 2013] 45.642920 total counts/ 3.397520 bgd. counts: snr = 22.919145
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.528111 pixels
  Position = (457.8, 227.4) = 5 35 30.43 -1 18 29.3
  Extent = 10.9 (8.6-14.5)", rotation angle = 0
  Source counts = 42.2 +/- 6.8
  Background counts = 3.4
  Rate = 0.003 +/- 0.0005
[Mon Jun 10 13:35:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:35:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:35:35 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 13:35:35 2013] Source does appear to be extended
[Mon Jun 10 13:35:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 14:19:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 14:19:03 2013] Initial guess for spatial extent in simple fitting = 10.95"
[Mon Jun 10 14:19:03 2013] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.962
[Mon Jun 10 14:19:03 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.95"
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jun 10 14:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15.csv
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jun 10 14:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15.csv
[Mon Jun 10 14:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jun 10 14:41:15 2013] Fit fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jun 10 14:41:26 2013] Spatial fit model total counts = 43.728300, observed total counts = 43.000000
[Mon Jun 10 14:41:26 2013] Offset between fit and detection position for source 20 = 0.294806 pixels
[Mon Jun 10 14:41:26 2013] 43.473130 total counts/ 8.228630 bgd. counts: snr = 12.286483
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.294806 pixels
  Position = (457.9, 227.2) = 5 35 30.38 -1 18 30.4
  Extent = 9.4 (5.1-13.3)", rotation angle = 0
  Source counts = 35.2 +/- 6.6
  Background counts = 8.2
  Rate = 0.003 +/- 0.0005
[Mon Jun 10 14:41:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 14:41:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 14:41:26 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 14:41:26 2013] Source does appear to be extended
[Mon Jun 10 14:41:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:16:26 2013] XMMSAS src. selection expression = ellipse(39791.487520, 19715.458000, 561.510616, 561.510616, 0.000000, X, Y)
[Mon Jun 10 15:16:26 2013] Writing source region out to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_src.reg
[Mon Jun 10 15:16:26 2013] Extracting stamp from image fullrun_mos2_xmm0112400101_pi300-10000_cl_sm2.00.img.gz, (426, 195) - (490, 259)
[Mon Jun 10 15:16:26 2013] XMMSAS bgd. selection expression = annulus(39791.487520, 19715.458000, 935.851027, 1871.702054, X, Y)
[Mon Jun 10 15:16:26 2013] Writing fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20.gif
[Mon Jun 10 15:19:21 2013] Mean detx,y = (-13242.33, -6287.36) 
[Mon Jun 10 15:19:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 15:19:39 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 15:19:39 2013] Setting source spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 10 15:19:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jun 10 15:24:43 2013] Not generating rmf since there are only 35 counts
[Mon Jun 10 15:24:43 2013] rmf not generated due to insufficient counts
[Mon Jun 10 15:25:26 2013] Updating aperture counts using extracted products
[Mon Jun 10 15:25:26 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 36.00
[Mon Jun 10 15:25:26 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 102.00
[Mon Jun 10 15:25:26 2013] Got source and background scale factors 810142.000000, 6186198.000000
[Mon Jun 10 15:25:26 2013] User source parameters:
  Position = (457.9, 227.2) = 5 35 30.38 -1 18 30.4
  Extent = 9.4 (5.1-13.3)", rotation angle = 0
  Source aperture counts = 22.6 +/- 7.1
  Background aperture counts = 13.4
  Rate = 0.002 +/- 0.0006

[Mon Jun 10 15:25:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 15:25:27 2013] Using photon index=1.80, rate=0.00286, arf fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20.arf
[Mon Jun 10 15:25:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 15:25:27 2013] Updating source flux to 1e-13
[Mon Jun 10 15:25:29 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 15:25:30 2013] xmm0112400101/analysis//spectral/fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete