[Mon Jun 10 11:51:45 2013] Detection parameters:
  Position = (324.8, 286.1) = 5 36 8.99 -1 14 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.8 +/- 10.3
  Background counts = 5.5
  Rate = 0.005 +/- 0.0009

[Mon Jun 10 11:51:45 2013] Off-axis axis estimate = 2.11'
[Mon Jun 10 13:02:53 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 13:02:53 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jun 10 13:02:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Mon Jun 10 13:02:53 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.49"
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 10 13:35:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 10 13:35:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:35 2013] Source 17 is offset by -6.052971 and 5.946496 pixels which is larger than
2 X fitted extent = 0.860372 x 0.860372, not incorporating fit results
[Mon Jun 10 13:35:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:35:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:35:35 2013] Assessing source extent using major
[Mon Jun 10 13:35:35 2013] Source does appear to be extended
[Mon Jun 10 13:35:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 14:19:03 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 14:19:03 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jun 10 14:19:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Mon Jun 10 14:19:03 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.49"
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 10 14:41:14 2013] Fit fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 10 14:41:15 2013] Fit fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jun 10 14:41:26 2013] Spatial fit model total counts = 135.096000, observed total counts = 127.000000
[Mon Jun 10 14:41:26 2013] Offset between fit and detection position for source 17 = 0.090129 pixels
[Mon Jun 10 14:41:26 2013] 137.985100 total counts/ 99.752400 bgd. counts: snr = 3.828012
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.090129 pixels
  Position = (324.9, 286.1) = 5 36 8.97 -1 14 14.0
  Extent = 4.2 (3.2-6.1)", rotation angle = 0
  Source counts = 38.2 +/- 11.7
  Background counts = 99.8
  Rate = 0.003 +/- 0.001
[Mon Jun 10 14:41:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 14:41:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 14:41:26 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 14:41:26 2013] Source does appear to be extended
[Mon Jun 10 14:41:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:16:26 2013] XMMSAS src. selection expression = ellipse(28218.350400, 24843.197600, 250.252807, 250.252807, 0.000000, X, Y)
[Mon Jun 10 15:16:26 2013] Writing source region out to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 10 15:16:26 2013] Extracting stamp from image fullrun_mos2_xmm0112400101_pi300-10000_cl_sm2.00.img.gz, (311, 272) - (339, 300)
[Mon Jun 10 15:16:26 2013] XMMSAS bgd. selection expression = annulus(28218.350400, 24843.197600, 417.088012, 834.176024, X, Y)
[Mon Jun 10 15:16:26 2013] Writing fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 10 15:18:38 2013] Mean detx,y = (-1211.88, -2446.33) 
[Mon Jun 10 15:18:39 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 15:18:46 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 15:18:46 2013] Setting source spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 10 15:18:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 10 15:24:25 2013] Not generating rmf since there are only 38 counts
[Mon Jun 10 15:24:25 2013] rmf not generated due to insufficient counts
[Mon Jun 10 15:25:26 2013] Updating aperture counts using extracted products
[Mon Jun 10 15:25:26 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 49.00
[Mon Jun 10 15:25:26 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 54.00
[Mon Jun 10 15:25:26 2013] Got source and background scale factors 199180.000000, 1494504.000000
[Mon Jun 10 15:25:26 2013] User source parameters:
  Position = (324.9, 286.1) = 5 36 8.97 -1 14 14.0
  Extent = 4.2 (3.2-6.1)", rotation angle = 0
  Source aperture counts = 41.8 +/- 8.1
  Background aperture counts = 7.2
  Rate = 0.003 +/- 0.0007

[Mon Jun 10 15:25:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 15:25:27 2013] Using photon index=1.80, rate=0.0031, arf fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17.arf
[Mon Jun 10 15:25:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 15:25:27 2013] Updating source flux to 5.3e-14
[Mon Jun 10 15:25:29 2013] Flag b found in src. 17 procflags, skipping spectral fitting
[Mon Jun 10 15:25:29 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 15:25:30 2013] xmm0112400101/analysis//spectral/fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete