[Mon Jun 10 11:51:45 2013] Detection parameters:
  Position = (230.4, 314.8) = 5 36 36.38 -1 12 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.4 +/- 11.2
  Background counts = 3.5
  Rate = 0.01 +/- 0.001

[Mon Jun 10 11:51:45 2013] Off-axis axis estimate = 5.07'
[Mon Jun 10 13:02:53 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 13:02:53 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Mon Jun 10 13:02:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Mon Jun 10 13:02:53 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.96"
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 13:35:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 13:35:21 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 13:35:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 13:35:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:35 2013] Spatial fit model total counts = 117.685000, observed total counts = 106.000000
[Mon Jun 10 13:35:35 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 13:35:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:35:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:35:35 2013] Assessing source extent using major
[Mon Jun 10 13:35:35 2013] Source does appear to be extended
[Mon Jun 10 13:35:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 14:19:03 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 14:19:03 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Mon Jun 10 14:19:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Mon Jun 10 14:19:03 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.96"
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 14:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 14:41:14 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 14:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 14:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 14:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 14:41:15 2013] fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 14:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 14:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 14:41:26 2013] Source 15 is offset by -6.885863 and 6.490526 pixels which is larger than
2 X fitted extent = 1.213292 x 1.213292, not incorporating fit results
[Mon Jun 10 14:41:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 14:41:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 14:41:26 2013] Assessing source extent using major
[Mon Jun 10 14:41:26 2013] Source does appear to be extended
[Mon Jun 10 14:41:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:16:25 2013] XMMSAS src. selection expression = ellipse(19998.323929, 27339.969788, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 15:16:25 2013] Writing source region out to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_src.reg
[Mon Jun 10 15:16:25 2013] Extracting stamp from image fullrun_mos2_xmm0112400101_pi300-10000_cl_sm2.00.img.gz, (193, 277) - (268, 352)
[Mon Jun 10 15:16:25 2013] XMMSAS bgd. selection expression = annulus(19998.323929, 27339.969788, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 15:16:25 2013] Writing fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15.gif
[Mon Jun 10 15:17:33 2013] Mean detx,y = (7236.00, -840.79) 
[Mon Jun 10 15:17:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 15:17:46 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 15:17:47 2013] Setting source spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Jun 10 15:17:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon Jun 10 15:24:02 2013] Not generating rmf since there are only 83 counts
[Mon Jun 10 15:24:02 2013] rmf not generated due to insufficient counts
[Mon Jun 10 15:25:25 2013] Updating aperture counts using extracted products
[Mon Jun 10 15:25:25 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 96.00
[Mon Jun 10 15:25:25 2013] Total counts from fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 94.00
[Mon Jun 10 15:25:25 2013] Got source and background scale factors 1201706.000000, 6466544.000000
[Mon Jun 10 15:25:25 2013] User source parameters:
  Position = (230.4, 314.8) = 5 36 36.38 -1 12 8.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 78.5 +/- 10.8
  Background aperture counts = 17.5
  Rate = 0.006 +/- 0.0009

[Mon Jun 10 15:25:25 2013] Updating counts from extracted products
[Mon Jun 10 15:25:25 2013] Set source signif. to 78.53/4.18 = 18.79
[Mon Jun 10 15:25:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 15:25:27 2013] Using photon index=1.80, rate=0.00637, arf fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15.arf
[Mon Jun 10 15:25:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 15:25:27 2013] Updating source flux to 1.3e-13
[Mon Jun 10 15:25:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 15:25:30 2013] xmm0112400101/analysis//spectral/fullrun_mos2_xmm0112400101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete