[Mon Jun 10 11:51:22 2013] Detection parameters:
  Position = (393.7, 491.6) = 5 35 49.01 -0 59 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.1 +/- 9.6
  Background counts = 2.4
  Rate = 0.005 +/- 0.0008

[Mon Jun 10 11:51:23 2013] Off-axis axis estimate = 15.62'
[Mon Jun 10 12:32:38 2013] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 12:32:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 12:32:38 2013] Initial guess for spatial extent in simple fitting = 14.24"
[Mon Jun 10 12:32:38 2013] source mask rpix=3.3, npix_max = 56, mask sum = 48, frac = 0.843
[Mon Jun 10 12:32:38 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 14.24"
[Mon Jun 10 13:02:53 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun 10 13:02:53 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun 10 13:02:53 2013] Fit fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_src10 appears to have run properly
[Mon Jun 10 13:02:53 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun 10 13:02:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun 10 13:02:53 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun 10 13:02:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun 10 13:02:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112400101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:35:31 2013] Spatial fit model total counts = 73.615300, observed total counts = 74.000000
[Mon Jun 10 13:35:31 2013] Offset between fit and detection position for source 7 = 0.367509 pixels
[Mon Jun 10 13:35:31 2013] 70.566700 total counts/ 21.073900 bgd. counts: snr = 10.781261
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.367509 pixels
  Position = (393.5, 491.4) = 5 35 49.09 -0 59 21.2
  Extent = 11.0 (8.2-14.4)" x 4.1 (3.6-5.4)", rotation angle = 22 (10-31) degrees
  Source counts = 49.5 +/- 8.4
  Background counts = 21.1
  Rate = 0.004 +/- 0.0007
[Mon Jun 10 13:35:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:35:31 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 13:35:31 2013] Source does appear to be extended
[Mon Jun 10 13:35:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.51
[Mon Jun 10 13:35:31 2013] Source is asymmetric
[Mon Jun 10 13:58:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 13:58:01 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Mon Jun 10 13:58:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.253
[Mon Jun 10 13:58:01 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.54"
[Mon Jun 10 14:19:03 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun 10 14:19:03 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun 10 14:19:03 2013] Fit fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Jun 10 14:19:03 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun 10 14:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 10 14:19:03 2013] fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun 10 14:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 10 14:19:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112400101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 14:41:23 2013] Spatial fit model total counts = 69.498600, observed total counts = 65.000000
[Mon Jun 10 14:41:23 2013] Offset between fit and detection position for source 7 = 0.028675 pixels
[Mon Jun 10 14:41:23 2013] 68.733200 total counts/ 21.294800 bgd. counts: snr = 10.280003
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.028675 pixels
  Position = (393.5, 491.3) = 5 35 49.08 -0 59 21.3
  Extent = 10.5 (7.8-14.5)" x 4.1 (3.1-5.4)", rotation angle = 20 (7-31) degrees
  Source counts = 47.4 +/- 8.3
  Background counts = 21.3
  Rate = 0.004 +/- 0.0007
[Mon Jun 10 14:41:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 14:41:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 14:41:23 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 14:41:23 2013] Source does appear to be extended
[Mon Jun 10 14:41:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.44
[Mon Jun 10 15:06:36 2013] XMMSAS src. selection expression = ellipse(34185.151200, 42698.379800, 628.914018, 244.002007, 20.297253, X, Y)
[Mon Jun 10 15:06:36 2013] Writing source region out to fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 10 15:06:36 2013] Extracting stamp from image fullrun_mos1_xmm0112400101_pi300-10000_cl_sm2.00.img.gz, (357, 455) - (430, 527)
[Mon Jun 10 15:06:36 2013] XMMSAS bgd. selection expression = annulus(34185.151200, 42698.379800, 1048.190030, 2096.380060, X, Y)
[Mon Jun 10 15:06:36 2013] Writing fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7.gif
[Mon Jun 10 15:09:10 2013] Mean detx,y = (16135.06, 5108.98) 
[Mon Jun 10 15:09:11 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 15:09:22 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 15:09:22 2013] Setting source spectrum file to fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 10 15:09:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun 10 15:15:53 2013] Not generating rmf since there are only 47 counts
[Mon Jun 10 15:15:53 2013] rmf not generated due to insufficient counts
[Mon Jun 10 15:25:24 2013] Updating aperture counts using extracted products
[Mon Jun 10 15:25:24 2013] Total counts from fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 47.00
[Mon Jun 10 15:25:24 2013] Total counts from fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 43.00
[Mon Jun 10 15:25:24 2013] Got source and background scale factors 395755.000000, 4289244.000000
[Mon Jun 10 15:25:24 2013] User source parameters:
  Position = (393.5, 491.3) = 5 35 49.08 -0 59 21.3
  Extent = 10.5 (7.8-14.5)" x 4.1 (3.1-5.4)", rotation angle = 20 (7-31) degrees
  Source aperture counts = 43.0 +/- 7.9
  Background aperture counts = 4.0
  Rate = 0.003 +/- 0.0006

[Mon Jun 10 15:25:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 15:25:25 2013] Using photon index=1.80, rate=0.00385, arf fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7.arf
[Mon Jun 10 15:25:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 15:25:25 2013] Updating source flux to 2e-13
[Mon Jun 10 15:25:28 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 15:25:29 2013] xmm0112400101/analysis//spectral/fullrun_mos1_xmm0112400101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete