[Thu May  9 02:53:59 2013] Detection parameters:
  Position = (148.6, 172.2) = 3 44 26.35 24 35 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10789.8 +/- 126.3
  Background counts = 101.2
  Rate = 0.2 +/- 0.002

[Thu May  9 02:54:01 2013] Off-axis axis estimate = 14.20'
[Thu May  9 02:58:25 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Thu May  9 02:58:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 02:58:25 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Thu May  9 02:58:25 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Thu May  9 02:58:25 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.53"
[Thu May  9 04:16:30 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  9 04:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1.csv
[Thu May  9 04:16:30 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  9 04:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1.csv
[Thu May  9 04:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 04:16:31 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  9 04:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  9 04:16:31 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  9 04:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  9 04:16:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 06:05:53 2013] Warning, spatial fit 1 centroid is now closest to src. 45
[Thu May  9 06:05:53 2013] Vigneting correction estimate = 1.000000
[Thu May  9 06:05:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 06:05:53 2013] Assessing source extent using major
[Thu May  9 06:05:53 2013] Source does appear to be extended
[Thu May  9 06:05:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 06:06:21 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Thu May  9 06:06:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 06:06:21 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Thu May  9 06:06:21 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Thu May  9 06:06:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.53"
[Thu May  9 07:05:46 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  9 07:05:46 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  9 07:05:46 2013] Fit fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May  9 07:05:47 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  9 07:05:47 2013] fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  9 07:05:47 2013] Fit fullrun_pn_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  9 09:03:02 2013] Spatial fit model total counts = 9113.600000, observed total counts = 8860.000000
[Thu May  9 09:03:02 2013] Offset between fit and detection position for source 1 = 0.325160 pixels
[Thu May  9 09:03:02 2013] 9166.970000 total counts/ 2706.010000 bgd. counts: snr = 124.203077
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.325160 pixels
  Position = (148.7, 172.5) = 3 44 26.30 24 35 22.9
  Extent = 9.7 (9.5-9.9)" x 5.2 (5.0-5.3)", rotation angle = 45 (44-47) degrees
  Source counts = 6461.0 +/- 95.7
  Background counts = 2706.0
  Rate = 0.2 +/- 0.002
[Thu May  9 09:03:03 2013] Vigneting correction estimate = 1.000000
[Thu May  9 09:03:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 09:03:03 2013] Assessing source extent using major axis lower bound
[Thu May  9 09:03:03 2013] Source does appear to be extended
[Thu May  9 09:03:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Thu May  9 09:03:03 2013] Source is asymmetric
[Thu May  9 09:03:29 2013] Counts = 6460.960000, rescaling region sizes by 2.000000
[Thu May  9 09:03:29 2013] XMMSAS src. selection expression = ellipse(12892.202200, 14959.993942, 1163.781633, 621.016818, 45.223400, X, Y)
[Thu May  9 09:03:29 2013] Writing source region out to fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_src.reg
[Thu May  9 09:03:29 2013] Extracting stamp from image fullrun_pn_xmm0112390101_pi300-10000_cl_sm2.00.img.gz, (82, 106) - (216, 239)
[Thu May  9 09:03:29 2013] XMMSAS bgd. selection expression = annulus(12892.202200, 14959.993942, 3879.272112, 7758.544223, X, Y) && !ellipse(19056.871780, 8947.596832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14447.864380, 22911.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13085.891434, 21545.994934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19520.030540, 22990.873840, 453.053613, 453.053613, 0.000000, X, Y) && !ellipse(12176.533279, 22746.623077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16999.170975, 20448.174835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18254.000000, 16605.483200, 521.572015, 375.868811, 16.572245, X, Y) && !ellipse(11914.005310, 15868.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17422.479553, 14926.576782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14852.273132, 14923.556686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19743.681396, 11283.808884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16446.468216, 9821.998207, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 09:03:29 2013] Writing fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1.gif
[Thu May  9 09:03:47 2013] Mean detx,y = (9463.06, -11887.67) 
[Thu May  9 09:03:51 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 09:05:01 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 09:05:01 2013] Setting source spectrum file to fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  9 09:05:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  9 12:12:25 2013] Updating aperture counts using extracted products
[Thu May  9 12:12:25 2013] Total counts from fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 7899.00
[Thu May  9 12:12:25 2013] Total counts from fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 15336.00
[Thu May  9 12:12:25 2013] Got source and background scale factors 2150601.000000, 51824532.000000
[Thu May  9 12:12:25 2013] User source parameters:
  Position = (148.7, 172.5) = 3 44 26.30 24 35 22.9
  Extent = 9.7 (9.5-9.9)" x 5.2 (5.0-5.3)", rotation angle = 45 (44-47) degrees
  Source aperture counts = 7262.6 +/- 89.9
  Background aperture counts = 636.4
  Rate = 0.2 +/- 0.002

[Thu May  9 12:12:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 12:12:32 2013] Using photon index=1.80, rate=0.157, arf fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1.arf
[Thu May  9 12:12:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 12:12:32 2013] Updating source flux to 1.4e-12
[Thu May  9 12:13:06 2013] xmm0112390101/analysis//spectral/fullrun_pn_xmm0112390101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete