[Thu May  9 02:54:31 2013] Detection parameters:
  Position = (219.9, 101.7) = 3 44 3.58 24 30 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2945.0 +/- 64.0
  Background counts = 33.3
  Rate = 0.05 +/- 0.001

[Thu May  9 02:54:31 2013] Off-axis axis estimate = 15.36'
[Thu May  9 04:16:33 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Thu May  9 04:16:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 04:16:33 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Thu May  9 04:16:33 2013] source mask rpix=3.2, npix_max = 56, mask sum = 54, frac = 0.964
[Thu May  9 04:16:33 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 14.11"
[Thu May  9 05:13:02 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May  9 05:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5.csv
[Thu May  9 05:13:02 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May  9 05:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5.csv
[Thu May  9 05:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 05:13:03 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May  9 05:13:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  9 05:13:03 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  9 05:13:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  9 05:13:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 06:06:00 2013] Spatial fit model total counts = 2909.520000, observed total counts = 2555.000000
[Thu May  9 06:06:00 2013] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 06:06:00 2013] Vigneting correction estimate = 1.000000
[Thu May  9 06:06:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 06:06:00 2013] Assessing source extent using major
[Thu May  9 06:06:00 2013] Source does appear to be extended
[Thu May  9 06:06:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:05:47 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Thu May  9 07:05:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 07:05:47 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Thu May  9 07:05:47 2013] source mask rpix=3.2, npix_max = 56, mask sum = 54, frac = 0.964
[Thu May  9 07:05:47 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.11"
[Thu May  9 08:10:04 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  9 08:10:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5.csv
[Thu May  9 08:10:04 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  9 08:10:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5.csv
[Thu May  9 08:10:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  9 08:10:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 09:03:10 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 18.101803 pixels away
[Thu May  9 09:03:10 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 41.691785 pixels away
[Thu May  9 09:03:10 2013] Vigneting correction estimate = 1.000000
[Thu May  9 09:03:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 09:03:10 2013] Assessing source extent using major
[Thu May  9 09:03:10 2013] Source does appear to be extended
[Thu May  9 09:03:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 10:20:59 2013] Counts = 2945.015869, rescaling region sizes by 2.000000
[Thu May  9 10:20:59 2013] XMMSAS src. selection expression = ellipse(19085.908508, 8801.176613, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May  9 10:20:59 2013] Writing source region out to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_src.reg
[Thu May  9 10:20:59 2013] Extracting stamp from image fullrun_mos1_xmm0112390101_pi300-10000_cl_sm2.00.img.gz, (145, 27) - (295, 177)
[Thu May  9 10:20:59 2013] XMMSAS bgd. selection expression = annulus(19085.908508, 8801.176613, 4350.000000, 8700.000000, X, Y) && !ellipse(12883.013600, 14955.357400, 723.282421, 328.360809, 47.072912, X, Y) && !ellipse(24939.039760, 13785.821800, 649.801619, 364.382410, 352.589510, X, Y) && !ellipse(17423.066315, 14922.132263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.604462, 16596.353912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15508.450348, 16744.896164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19812.992264, 11273.341431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14997.362940, 14947.091000, 830.224024, 522.045615, 335.083285, X, Y) && !ellipse(16484.651600, 9830.981600, 933.248027, 288.240808, 6.997429, X, Y) && !ellipse(21952.717545, 11609.515930, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 10:20:59 2013] Writing fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46.gif
[Thu May  9 10:27:07 2013] Mean detx,y = (16684.91, 1756.39) 
[Thu May  9 10:27:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 10:28:01 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 10:28:01 2013] Setting source spectrum file to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu May  9 10:28:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu May  9 10:51:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 10:51:02 2013] rmf not generated due to insufficient counts
[Thu May  9 12:12:33 2013] Updating aperture counts using extracted products
[Thu May  9 12:12:33 2013] Total counts from fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 2777.00
[Thu May  9 12:12:33 2013] Total counts from fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 8839.00
[Thu May  9 12:12:34 2013] Got source and background scale factors 3423619.000000, 61436985.000000
[Thu May  9 12:12:34 2013] User source parameters:
  Position = (219.9, 101.7) = 3 44 3.58 24 30 14.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2284.4 +/- 53.7
  Background aperture counts = 492.6
  Rate = 0.04 +/- 0.001

[Thu May  9 12:12:34 2013] Updating counts from extracted products
[Thu May  9 12:12:34 2013] Set source signif. to 2284.44/22.19 = 102.93
[Thu May  9 12:12:40 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 12:12:40 2013] Using photon index=1.80, rate=0.042, arf fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46.arf
[Thu May  9 12:12:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 12:12:40 2013] Updating source flux to 1.2e-12
[Thu May  9 12:12:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 12:12:55 2013] xmm0112390101/analysis//spectral/fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete