[Thu May  9 02:54:31 2013] Detection parameters:
  Position = (374.8, 320.8) = 3 43 14.16 24 46 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.1 +/- 13.5
  Background counts = 40.0
  Rate = 0.002 +/- 0.0004

[Thu May  9 02:54:31 2013] Off-axis axis estimate = 5.77'
[Thu May  9 04:16:33 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu May  9 04:16:33 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Thu May  9 04:16:33 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.896
[Thu May  9 04:16:33 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.31"
[Thu May  9 05:13:02 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src33.ximg exists
[Thu May  9 05:13:02 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu May  9 05:13:02 2013] Fit fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_src33 appears to have run properly
[Thu May  9 05:13:03 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu May  9 05:13:03 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu May  9 05:13:03 2013] Fit fullrun_mos1_xmm0112390101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu May  9 06:06:00 2013] Spatial fit model total counts = 279.029000, observed total counts = 258.000000
[Thu May  9 06:06:00 2013] Offset between fit and detection position for source 20 = 0.448392 pixels
[Thu May  9 06:06:00 2013] 279.753800 total counts/ 223.312000 bgd. counts: snr = 3.776981
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.448392 pixels
  Position = (374.4, 320.6) = 3 43 14.28 24 46 7.2
  Extent = 8.4 (5.3-11.5)", rotation angle = 0
  Source counts = 56.4 +/- 16.7
  Background counts = 223.3
  Rate = 0.001 +/- 0.0003
[Thu May  9 06:06:00 2013] Vigneting correction estimate = 1.000000
[Thu May  9 06:06:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 06:06:00 2013] Assessing source extent using major axis lower bound
[Thu May  9 06:06:00 2013] Source does appear to be extended
[Thu May  9 06:06:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:05:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 07:05:47 2013] Initial guess for spatial extent in simple fitting = 8.39"
[Thu May  9 07:05:47 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Thu May  9 07:05:47 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.39"
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33.csv
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33.csv
[Thu May  9 08:10:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May  9 08:10:05 2013] fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May  9 08:10:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May  9 08:10:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112390101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 09:03:10 2013] Warning, spatial fit 33 centroid is now closest to src. 14
[Thu May  9 09:03:11 2013] Vigneting correction estimate = 1.000000
[Thu May  9 09:03:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 09:03:11 2013] Assessing source extent using major axis lower bound
[Thu May  9 09:03:11 2013] Source does appear to be extended
[Thu May  9 09:03:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 10:20:59 2013] XMMSAS src. selection expression = ellipse(32528.523000, 27840.920400, 503.439014, 503.439014, 0.000000, X, Y)
[Thu May  9 10:20:59 2013] Writing source region out to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_src.reg
[Thu May  9 10:20:59 2013] Extracting stamp from image fullrun_mos1_xmm0112390101_pi300-10000_cl_sm2.00.img.gz, (346, 292) - (403, 350)
[Thu May  9 10:20:59 2013] XMMSAS bgd. selection expression = annulus(32528.523000, 27840.920400, 839.065024, 1678.130048, X, Y) && !ellipse(33134.914800, 26215.867000, 602.492817, 377.397611, 69.924630, X, Y)
[Thu May  9 10:20:59 2013] Writing fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20.gif
[Thu May  9 10:35:11 2013] Mean detx,y = (-4648.75, -7439.59) 
[Thu May  9 10:35:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 10:35:23 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 10:35:23 2013] Setting source spectrum file to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May  9 10:35:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu May  9 11:16:27 2013] Not generating rmf since there are only 56 counts
[Thu May  9 11:16:27 2013] rmf not generated due to insufficient counts
[Thu May  9 12:12:38 2013] Updating aperture counts using extracted products
[Thu May  9 12:12:38 2013] Total counts from fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 138.00
[Thu May  9 12:12:38 2013] Total counts from fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 734.00
[Thu May  9 12:12:38 2013] Got source and background scale factors 798400.000000, 5649070.000000
[Thu May  9 12:12:38 2013] User source parameters:
  Position = (374.4, 320.6) = 3 43 14.28 24 46 7.2
  Extent = 8.4 (5.3-11.5)", rotation angle = 0
  Source aperture counts = 34.3 +/- 12.8
  Background aperture counts = 103.7
  Rate = 0.0006 +/- 0.0002

[Thu May  9 12:12:40 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 12:12:40 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20.arf
[Thu May  9 12:12:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 12:12:40 2013] Updating source flux to 1.9e-14
[Thu May  9 12:12:48 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 12:12:55 2013] xmm0112390101/analysis//spectral/fullrun_mos1_xmm0112390101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete